Unique SA7045AR Seta 70cm Wide Single Bowl Stainless Steel Sink

• Generous single-bowl design: The 52-litre bowl provides a broad, uninterrupted washing area for large cookware, oven trays, serving dishes and food preparation.
• Hand-fabricated construction: Made from 1.0mm-thick stainless steel for a substantial, precisely formed sink body.
• 304-grade 18/10 stainless steel: Durable stainless steel construction supports dependable everyday use while complementing other stainless steel kitchen appliances.
• Brushed satin finish: The softly brushed surface gives the sink a refined contemporary appearance and helps make routine care more manageable.
• Practical 200mm bowl depth: The deep 650 x 400 x 200mm internal bowl provides useful capacity while helping contain water during washing and rinsing.
• Flexible universal rim: Suitable for either inset/topmount or undermount installation, allowing the sink to work with a wider range of benchtop designs.
• Clean 15mm internal corner radius: Gently rounded internal corners balance a streamlined, modern profile with improved access during cleaning.
• Noise-reducing treatment: Sound-deadening pads help lessen vibration and the metallic noise produced by running water, dishes and cookware.
• Protective underside coating: A lacquer coating beneath the bowl provides an additional protective treatment to the underside of the sink.
• Complete waste arrangement: A deluxe 90mm basket waste is supplied for a more complete and coordinated installation.
• Uncluttered sink deck: The no-drainer, no-tap-hole configuration creates a clean profile and lets the installer position compatible tapware separately in the benchtop.

• Brand: Unique
• Collection: Seta
• Product type: Single bowl kitchen sink
• Material: 304-grade 18/10 stainless steel
• Material thickness: 1.0mm
• Finish: Brushed Satin Stainless Steel
• Bowl configuration: Single bowl
• Drainer configuration: No drainer
• Tap holes: No tap hole
• Installation: Inset/topmount or undermount
• Bowl capacity: 52 litres
• Internal corner radius: 15mm
• Waste opening: 90mm
• Sound insulation: Sound-deadening pads
• Underside treatment: Lacquer coating

• Installation options: Suitable for inset/topmount or undermount installation.
• Benchtop preparation: Confirm the physical sink dimensions and use the supplier’s technical drawing when preparing the opening.
• Qualified installation: Installation should be completed by a suitably qualified tradesperson in accordance with local plumbing requirements.
• Cabinet clearance: Confirm adequate cabinet space for the 700 x 450 x 200mm sink, waste connection and plumbing.
• Pre-installation inspection: Inspect the sink for damage and verify all dimensions before cutting the benchtop.

Warranty coverage

Unique Home Products is a Melbourne-based supplier of kitchen, bathroom, and laundry products, established in 1981 and formerly known as Mamoli Australia. Its products are backed by a manufacturer’s warranty, providing peace of mind and reliable after-sales support.

• Stainless steel products: 25 years — Replacement
• Freestanding baths: 5 years — Manufacturing defects

Proof of purchase is required for all warranty claims.

What’s covered

• Manufacturing defects in materials and workmanship
• Repair, replacement, or credit of faulty products at Unique’s discretion

What’s not covered

• Products installed after a fault was apparent
• Faulty or incorrect installation
• General wear and tear
• Damage or shortages not reported within 7 days of delivery
• Products not manufactured by Unique
• Loss or damage to property or persons resulting from a defective product

Conditions

• Products must be inspected on delivery, and any fault reported in writing within 7 days
• Faulty products must not be installed
• Products must be installed correctly and used in accordance with manufacturer instructions
• Unique may inspect the product before a claim is accepted
• Proof of purchase must be provided with all claims

Making a claim

Claims should be directed through the original place of purchase. Unique can also be contacted on (03) 9354 3744 or at sales@uniquehp.com. Please report faults in writing and have your proof of purchase ready.

Australian Consumer Law

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

The SA7045AR is the 700mm single-bowl model in Unique’s Seta collection. Its 700 x 450mm overall footprint contains a 650 x 400 x 200mm bowl with a stated 52-litre capacity, giving it the working volume needed for larger washing, rinsing and preparation tasks without adding a separate drainer.

The sink is hand fabricated from 1.0mm-thick 304-grade 18/10 stainless steel and finished in Brushed Satin Stainless Steel. Sound-deadening pads and a protective lacquer coating are applied beneath the bowl to support quieter day-to-day use and provide additional underside treatment.

Its universal rim allows inset/topmount or undermount installation. This gives the installer and benchtop fabricator flexibility to choose a raised-rim presentation or a cleaner undermount transition, subject to the benchtop material, cabinet clearances and the supplied technical drawing.

The sink has no factory tap hole, allowing compatible tapware to be positioned separately in the benchtop where the installation permits. A deluxe 90mm basket waste is included, while tapware, plumbing fittings and installation materials are supplied separately.

Compatible optional accessories listed by Unique include chopping boards CB-4530 and CB-3445, extension or drip trays TF-4030A, TF3924 and TF340, and dish basket SB-3832. These accessories are sold separately unless expressly included by the retailer.

Before cutting the benchtop, the installer should inspect the physical sink, confirm all dimensions and refer to the attached SA7045AR technical drawing. Final cut-out sizing and support requirements should be determined by the qualified installer and benchtop fabricator.

• Included: Unique SA7045AR Seta single bowl sink and deluxe 90mm basket waste.
• Sold separately: Compatible chopping boards, extension/drip trays, dish basket, tapware, plumbing fittings and installation materials.

• SA7045AR SPECIFICATIONS SHEET (PDF)
• SA7045AR TECHNICAL DRAWING (PDF)