Product Description

Product Overview:

The Spezialist S30341SS is a 34cm inset gas cooktop designed and built in Melbourne. Its 1-burner layout combines responsive brass burners, cast iron trivets and tactile rotary controls in a purpose-built cooking platform. Its slim 1.2mm stainless steel surface is inset into the benchtop cut-out for a low-profile edge, but it is not a fully flush-mounted installation.

One Super triple-ring burner with a 5.3–22.0MJ/h working range provides immediate flame response across everyday simmering, boiling and high-heat cooking. Electronic ignition, flame detection, automatic re-ignition and flame-failure shut-off support confident operation.

Natural Gas and LPG versions are separately identified so the correct fuel configuration can be selected before installation. The verified 320 × 500mm cut-out is specific to this inset construction and must be followed during benchtop preparation.

Product Features:

• 1 brass burner: One Super triple-ring burner with a 5.3–22.0MJ/h working range
• Electronic flame detection: Monitors burner operation and supports automatic gas shut-off if the flame is lost.
• Automatic re-ignition: Supports continued operation following a brief flame interruption.
• Cast iron trivets: Create a stable, durable platform for cookware.
• LED status indication: Provides a visible operating reference at the control area.
• Australian design and manufacture: Proudly Australian owned, designed in Australia and built in Melbourne.

Colour / Finishes:

• Stainless Steel — S30341SS

Programmes / Functions:

• Single-spark ignition: Starts the selected burner directly from its rotary control.
• Variable flame control: Moves from stronger outer-ring heat to controlled inner-ring simmering.
• Automatic re-ignition: Supports continued flame operation after an interruption.
• Electronic flame failure protection: Stops the gas supply when a flame cannot be maintained.
• Natural Gas or LPG configuration: Select the factory-specified fuel variant that matches the installation.

Cleaning & Maintenance:

• Cool before cleaning: Switch off and allow the cooktop, trivets and burner furniture to cool completely.
• Removable burner furniture: Clean separately, dry thoroughly and refit in the correct position.
• Surface care: Use a soft cloth and mild non-abrasive cleaner suitable for the selected finish.
• Avoid abrasive products: Do not use steel wool, harsh scourers or chlorine-based cleaners.
• Ignition components: Keep the ignitor and flame sensor clean and dry.

Specifications:

• Brand: Spezialist
• Base model: S30341SS
• Product type: Built-in gas cooktop
• Cooking areas: 1
• Fuel options: Natural Gas or LPG — variant dependent
• Burner configuration: One Super triple-ring burner with a 5.3–22.0MJ/h working range
• Burner material: Brass
• Trivet material: Cast iron
• Control type: Rotary control knobs
• Ignition: Single-spark electronic
• Flame failure protection: Electronic automatic gas shut-off
• Gas inlet connection: G 1/2-inch male
• Electrical connection: C13 plug with 2-metre power lead
• Mounting type: Inset — the slim 1.2mm stainless steel surface sits low within the benchtop cut-out but is not fully flush
• Surface: 1.2mm stainless steel

Product Measurements:

• Product dimensions (W × D × H including trivet): 340 × 520 × 123.5 mm
• Recommended cut-out (W × D): 320 × 500 mm
• Cut-out height including clearance: 105 mm
• Minimum clearance beneath cooktop: 25 mm

Installation & Requirements:

• Licensed gas fitter: Gas connection, pressure setting and commissioning must be completed by an authorised installer.
• Fuel pressure: Natural Gas 1.0kPa; ULPG 2.75kPa.
• Mounting and benchtop preparation: This inset configuration uses a slim 1.2mm stainless steel surface that sits low in the prepared opening while retaining a slight edge above the benchtop; it is not flush-mounted. Use the 320 × 500mm for this inset configuration. Confirm the model-specific drawing before cutting.
• Clearance beneath cooktop: Minimum 25mm.
• Rangehood clearance: Minimum 650mm from the trivet supporting surface to the underside of the rangehood filters.
• Application: Domestic indoor food cooking only; not suitable for outdoor use.

Country of Origin:

• Designed and built in Melbourne, Australia.

Extra Information:

Spezialist is proudly Australian owned. This compact inset model provides a dedicated high-output gas zone for modular kitchens and serious wok cooking.

Confirm the required Natural Gas or LPG variant before ordering, as each fuel configuration has its own supplier identifier.

Warranty:

Spezialist cooking surfaces are manufactured by Haus Group Australia and are backed by a 5-year manufacturer's warranty covering parts and labour. All warranties are in addition to your rights under the Australian Consumer Law.

Included Products / Accessories:

• Cooktop chassis unit: 1
• Cast iron trivet: Included
• Wok cradle: Included
• Burner furniture: Included
• Cabinet fixing clips: Included
• Natural Gas regulator: Natural Gas variant only
• Operating and installation instructions: Shared Spezialist gas cooktop manual

Downloads / Product Files:

• S30341SS SPECIFICATIONS SHEET (PDF)

• SPEZIALIST USER MANUAL (PDF)