Fienza 68609 41cm Wide Kuro Round Single Bowl Granite Kitchen Sink

• Compact round 22-litre bowl: A 360mm inner bowl diameter with 195mm depth for glasses, produce and everyday rinsing.
• Round 410mm outer diameter: A small footprint that suits bars, wet bars and secondary preparation areas.
• Composite granite construction: A hard-wearing surface made for daily kitchen use, supplied pre-assembled.
• Food-safe hygienic surface: A smooth finish suited to food preparation.
• Silky smooth finish: Easy to clean with a soft cloth or sponge and mild detergent.
• Impact, heat and stain resistant: Built to cope with busy kitchens and everyday wear.
• Matching integrated overflow: Coloured to match the sink for a seamless, tidy appearance.
• Basket waste included: PVD matte black basket waste supplied with the sink.
• Installation: topmount or undermount: One sink that suits different benchtop styles.
• Undermount brackets and screws included: Everything needed to secure the sink beneath the benchtop is supplied.
• Installation support: Fienza's cutting template and installation guide are available in the downloads below.

• Brand: Fienza
• Collection: Kuro
• Product type: Granite round single-bowl kitchen sink
• Product code: 68609
• Material: Composite granite
• Finish: Matte Black
• Installation options: Topmount or undermount
• Number of bowls: 1
• Bowl capacity: 22L
• Overflow: PVD matte black integrated overflow
• Waste: PVD matte black basket waste included
• Waste outlet size: 115mm diameter
• Drainer configuration: No integrated drainer
• Weight: 7kg

• Check before installing: Inspect the sink thoroughly before installation, as installing damaged, warped or faulty goods voids the warranty. The sink is supplied pre-assembled and must not be disassembled.
• Positioning: Allow sufficient clearance for the sink, including underneath. Centre the bowl with the tap position and keep at least 6cm between the tap and the closest cut line, and at least 6cm between sinks in multiple-sink installations.
• Cut-out: Check the cutting template against the actual sink, then mark and cut the opening (topmount 385mm diameter; undermount 349mm diameter). Run masking tape along the cut line to reduce chipping, drill pilot holes, cut to the inside of the line, clean the benchtop and test fit the sink.
• Topmount installation: Apply a continuous ring of neutral cure silicone around the opening, set the sink in place, remove excess silicone, apply even weight around the sink and allow the silicone to air dry for 24 hours. Acetic cure silicone may affect the colour or damage the sink.
• Undermount installation: Check the benchtop thickness, then drill ten evenly spaced holes under the benchtop and insert the threaded inserts. Lightly sand the sink's mounting face with 60 or 80 grit sandpaper, apply a continuous bead of neutral cure silicone, position the sink from below and secure it with all ten brackets and M6 bolts without overtightening. Remove excess silicone and allow it to air dry for 24 hours.
• Plumbing: Fit the basket waste and overflow pipe and complete the waste connections in accordance with applicable plumbing requirements.
• Commissioning: Test drainage, waste connections and the perimeter seal before normal use.

Warranty coverage

Fienza is an Australian brand and the Australian partner of RAK Ceramics, backed by a comprehensive manufacturer’s warranty across its bathroom and kitchen range. This warranty covers Fienza products and RAK ceramics supplied by Fienza, providing peace of mind and reliable after-sales support.

Residential warranty periods apply. Commercial warranty periods differ, so contact Fienza for details. Labour is not included unless otherwise specified.

Mixers & tapware

• Ceramic disc cartridges: Lifetime — Replacement parts or product, 15 years labour
• Mixer structure: Lifetime — Replacement parts or product, 1 year labour
• Chrome finish: Lifetime — Replacement parts or product, 1 year labour
• PVD finish: 10 years — Replacement parts or product, 1 year labour
• Electroplated finish: 5 years — Replacement parts or product, 1 year labour

Showers

• Heads, arms & hand pieces (structure): Lifetime — Replacement parts or product
• Rails (structure): Lifetime — Replacement parts or product, 1 year labour on twin showers
• Chrome finish: Lifetime — Replacement parts or product
• PVD & electroplated finishes: 5 years — Replacement parts or product

Bath outlets

• Structure: Lifetime — Replacement parts or product
• Chrome, PVD & electroplated finishes: 5 years — Replacement parts or product

Heated towel rails

• Structure & chrome finish: 15 years — Replacement parts or product, 1 year labour
• PVD finish: 10 years — Replacement parts or product, 1 year labour
• Electrical components: 5 years — Replacement parts or product, 1 year labour

Basins (including RAK)

• Vitreous china (Fienza & RAK): 5 years — Replacement parts or product, 1 year labour
• Cast stone solid surface (structure): 25 years — Replacement parts or product, 1 year labour
• Cast stone solid surface (finish): 5 years — Replacement product or repair, 1 year labour
• Concrete: 2 years — Replacement parts, 1 year labour

Toilets (including RAK)

• Vitreous china (Fienza & RAK): 5 years — Replacement parts or product, 1 year labour
• R&T cisterns (tanks & frames): 5 years — Replacement parts or product, 1 year labour
• Viega/Geberit cisterns (tanks & frames): 15 years — Replacement parts or product
• Cistern valves: 3 years — Replacement parts or product, 1 year labour
• Seats, accessories & spare parts: 1 year — Replacement parts or product

Baths

• Acrylic gloss white (shell): 10 years — Replacement product, 1 year labour
• Resin stone & cast stone solid surface (structure): 25 years — Replacement product, 1 year labour
• Resin stone & cast stone solid surface (finish): 5 years — Replacement product or repair, 1 year labour
• Bath frames & legs: 5 years — Replacement parts, 1 year labour

Sinks

• Stainless steel & laundry stainless steel: 25 years — Replacement product, 1 year labour
• Granite sinks: 7 years — Replacement product, 1 year labour
• Fire clay ceramic: 5 years — Replacement product, 1 year labour
• PVD coloured sinks: 3 years — Replacement product, 1 year labour

Cabinetry

• Australian made cabinets (MDF): 10 years — Replacement parts or product, 1 year labour
• Australian made cabinet drawer runners: Lifetime — Replacement parts or product, 1 year labour
• Cabinets (MDF): 5 years — Replacement parts or product, 1 year labour
• Handles, hinges & legs: 5 years — Replacement parts

Vanity tops

• Vitreous china, poly-marble, solid surface & engineered stone: 5 years — Replacement product, 1 year labour
• Concrete tops: 2 years — Replacement parts or product, 1 year labour
• Timber tops: 1 year — Replacement product, 1 year labour

Mirrors

• LED mirrors: 5 years — Replacement parts or product, 1 year labour
• Framed mirrors: 3 years — Replacement parts or product
• Standard & Australian made mirrors: 1 year — Replacement parts or product

Accessories

• Structure, chrome, PVD & electroplated finishes: 5 years — Replacement parts or product

Proof of purchase is required for all warranty claims. The warranty applies to the original owner only and is not transferable. Warranty periods apply to products purchased on or after 1st September 2023.

What’s covered

• Manufacturing defects in materials and workmanship
• Repair or replacement of faulty products
• Replacement of defective parts within the applicable warranty period

What’s not covered

• Products installed while incorrect or damaged (damage must be reported before installation)
• Incorrect installation or failure to follow manufacturer guidelines
• Misuse, abuse, accidental damage, or neglect
• Normal wear and tear, including rubber seals, O-rings, and washers
• Use of abrasive cleaners, harsh chemicals, or unsuitable cleaning products
• Repairs or modifications carried out by unauthorised parties
• Loss or damage caused by a defective product (only the product itself is covered)

Conditions

• Products must be installed by a licensed tradesperson
• Products must be installed and used in accordance with manufacturer instructions
• Products must be inspected before installation, as installation is acceptance of goods
• Proof of purchase must be provided with all claims, and photos may be required
• The warranty applies to the original owner only

Making a claim

For warranty claims after installation, contact Fienza’s after-sales service team directly. Claims should be directed through the original place of purchase where possible. Please have your proof of purchase ready when submitting your claim.

Australian Consumer Law

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

A round bowl suits spaces where a rectangular sink would feel heavy. At 410mm across it tucks into a bar cabinet, a butler's pantry or the end of an island, and its soft curves look deliberate beside a straight-edged benchtop.

At 195mm deep with a 22-litre capacity, it is sized for everyday jobs: rinsing vegetables, filling a jug, washing glasses or a quick hand clean-up while the main sink is busy. The matte black finish carries through to the PVD matte black overflow and basket waste.

Because the cut-out is circular, Fienza lists it as 385mm diameter for topmount and 349mm diameter for undermount. A round hole needs a hole saw or router with a circle jig, so check the cutting template against the actual sink and allow time for the neutral cure silicone to set for 24 hours.

• Sink: Fienza Kuro Granite 22L Round Single Bowl Kitchen Sink (68609 Matte Black)
• Basket waste: PVD matte black basket waste
• Installation hardware: Undermount brackets and screws

• INSTALLATION GUIDE (PDF)
• 68609 SPECIFICATIONS SHEET (PDF)
• 68609 CUTTING TEMPLATE (PDF)