Fienza 68606 116cm Wide Kuro One & Three Quarter Bowl Granite Kitchen Sink with Drainer

• Two bowls and a drainer: A 32L main bowl and a 22L second bowl sit beside an integrated draining board, 54 litres in total.
• Left or right bowl layouts: Left bowl and right bowl versions let the drainer sit on whichever side suits the benchtop.
• Tap hole options: Choose no tap hole, one 35mm tap hole for a mixer, or two 35mm tap holes for a mixer and a water filter tap.
• Composite granite construction: A hard-wearing surface made for daily kitchen use, supplied pre-assembled.
• Food-safe hygienic surface: A smooth finish suited to food preparation.
• Silky smooth finish: Easy to clean with a soft cloth or sponge and mild detergent.
• Impact, heat and stain resistant: Built to cope with busy kitchens and everyday wear.
• Matching integrated overflow: Coloured to match the sink for a seamless, tidy appearance.
• Basket wastes included: PVD matte black basket wastes supplied with the sink.
• Installation: topmount: One sink that suits a topmount benchtop installation.
• Installation support: Fienza's cutting template and installation guide are available in the downloads below.

• Brand: Fienza
• Collection: Kuro
• Product type: Granite one and three quarter bowl kitchen sink with drainer
• Product codes: 68606 (no tap hole), 68606L-1 and 68606R-1 (left or right bowl, 1 tap hole), 68606L-2 and 68606R-2 (left or right bowl, 2 tap holes)
• Material: Composite granite
• Finish: Matte Black
• Installation: Topmount
• Number of bowls: 2
• Bowl capacities: 32L / 22L
• Tap holes: None (68606), 1 x 35mm for a mixer (L-1 and R-1), or 2 x 35mm for a mixer and a water filter tap (L-2 and R-2)
• Overflow: PVD matte black integrated overflow
• Wastes: PVD matte black basket wastes included
• Waste outlet size: 115mm diameter
• Drainer configuration: Integrated single drainer
• Weight: 24.5kg

• Check before installing: Inspect the sink thoroughly before installation, as installing damaged, warped or faulty goods voids the warranty. The sink is supplied pre-assembled and must not be disassembled.
• Positioning: Allow sufficient clearance for the sink, including underneath. Centre the bowl with the tap position and keep at least 6cm between the tap and the closest cut line, and at least 6cm between sinks in multiple-sink installations.
• Cut-out: Check the cutting template against the actual sink, then mark and cut the opening (topmount 1135 x 475mm). Run masking tape along the cut line to reduce chipping, drill pilot holes, cut to the inside of the line, clean the benchtop and test fit the sink.
• Topmount installation: Apply a continuous ring of neutral cure silicone around the opening, set the sink in place, remove excess silicone, apply even weight around the sink and allow the silicone to air dry for 24 hours. Acetic cure silicone may affect the colour or damage the sink.
• Plumbing: Fit the basket wastes and overflow pipe and complete the waste connections in accordance with applicable plumbing requirements.
• Commissioning: Test drainage, waste connections and the perimeter seal before normal use.

Warranty coverage

Fienza is an Australian brand and the Australian partner of RAK Ceramics, backed by a comprehensive manufacturer’s warranty across its bathroom and kitchen range. This warranty covers Fienza products and RAK ceramics supplied by Fienza, providing peace of mind and reliable after-sales support.

Residential warranty periods apply. Commercial warranty periods differ, so contact Fienza for details. Labour is not included unless otherwise specified.

Mixers & tapware

• Ceramic disc cartridges: Lifetime — Replacement parts or product, 15 years labour
• Mixer structure: Lifetime — Replacement parts or product, 1 year labour
• Chrome finish: Lifetime — Replacement parts or product, 1 year labour
• PVD finish: 10 years — Replacement parts or product, 1 year labour
• Electroplated finish: 5 years — Replacement parts or product, 1 year labour

Showers

• Heads, arms & hand pieces (structure): Lifetime — Replacement parts or product
• Rails (structure): Lifetime — Replacement parts or product, 1 year labour on twin showers
• Chrome finish: Lifetime — Replacement parts or product
• PVD & electroplated finishes: 5 years — Replacement parts or product

Bath outlets

• Structure: Lifetime — Replacement parts or product
• Chrome, PVD & electroplated finishes: 5 years — Replacement parts or product

Heated towel rails

• Structure & chrome finish: 15 years — Replacement parts or product, 1 year labour
• PVD finish: 10 years — Replacement parts or product, 1 year labour
• Electrical components: 5 years — Replacement parts or product, 1 year labour

Basins (including RAK)

• Vitreous china (Fienza & RAK): 5 years — Replacement parts or product, 1 year labour
• Cast stone solid surface (structure): 25 years — Replacement parts or product, 1 year labour
• Cast stone solid surface (finish): 5 years — Replacement product or repair, 1 year labour
• Concrete: 2 years — Replacement parts, 1 year labour

Toilets (including RAK)

• Vitreous china (Fienza & RAK): 5 years — Replacement parts or product, 1 year labour
• R&T cisterns (tanks & frames): 5 years — Replacement parts or product, 1 year labour
• Viega/Geberit cisterns (tanks & frames): 15 years — Replacement parts or product
• Cistern valves: 3 years — Replacement parts or product, 1 year labour
• Seats, accessories & spare parts: 1 year — Replacement parts or product

Baths

• Acrylic gloss white (shell): 10 years — Replacement product, 1 year labour
• Resin stone & cast stone solid surface (structure): 25 years — Replacement product, 1 year labour
• Resin stone & cast stone solid surface (finish): 5 years — Replacement product or repair, 1 year labour
• Bath frames & legs: 5 years — Replacement parts, 1 year labour

Sinks

• Stainless steel & laundry stainless steel: 25 years — Replacement product, 1 year labour
• Granite sinks: 7 years — Replacement product, 1 year labour
• Fire clay ceramic: 5 years — Replacement product, 1 year labour
• PVD coloured sinks: 3 years — Replacement product, 1 year labour

Cabinetry

• Australian made cabinets (MDF): 10 years — Replacement parts or product, 1 year labour
• Australian made cabinet drawer runners: Lifetime — Replacement parts or product, 1 year labour
• Cabinets (MDF): 5 years — Replacement parts or product, 1 year labour
• Handles, hinges & legs: 5 years — Replacement parts

Vanity tops

• Vitreous china, poly-marble, solid surface & engineered stone: 5 years — Replacement product, 1 year labour
• Concrete tops: 2 years — Replacement parts or product, 1 year labour
• Timber tops: 1 year — Replacement product, 1 year labour

Mirrors

• LED mirrors: 5 years — Replacement parts or product, 1 year labour
• Framed mirrors: 3 years — Replacement parts or product
• Standard & Australian made mirrors: 1 year — Replacement parts or product

Accessories

• Structure, chrome, PVD & electroplated finishes: 5 years — Replacement parts or product

Proof of purchase is required for all warranty claims. The warranty applies to the original owner only and is not transferable. Warranty periods apply to products purchased on or after 1st September 2023.

What’s covered

• Manufacturing defects in materials and workmanship
• Repair or replacement of faulty products
• Replacement of defective parts within the applicable warranty period

What’s not covered

• Products installed while incorrect or damaged (damage must be reported before installation)
• Incorrect installation or failure to follow manufacturer guidelines
• Misuse, abuse, accidental damage, or neglect
• Normal wear and tear, including rubber seals, O-rings, and washers
• Use of abrasive cleaners, harsh chemicals, or unsuitable cleaning products
• Repairs or modifications carried out by unauthorised parties
• Loss or damage caused by a defective product (only the product itself is covered)

Conditions

• Products must be installed by a licensed tradesperson
• Products must be installed and used in accordance with manufacturer instructions
• Products must be inspected before installation, as installation is acceptance of goods
• Proof of purchase must be provided with all claims, and photos may be required
• The warranty applies to the original owner only

Making a claim

For warranty claims after installation, contact Fienza’s after-sales service team directly. Claims should be directed through the original place of purchase where possible. Please have your proof of purchase ready when submitting your claim.

Australian Consumer Law

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

A one and three quarter layout is a clever middle ground. The 32-litre main bowl takes roasting trays and stockpots, while the 22-litre second bowl is big enough for a colander of vegetables or a stack of glasses, so a dirty pan and clean produce never have to share the same water.

With five codes in the one listing, the difference comes down to tap holes and handing. The base 68606 has no tap hole. The left bowl 68606L-1 and right bowl 68606R-1 have a single 35mm hole for a mixer, and 68606L-2 and 68606R-2 add a second 35mm hole for a water filter tap, so filtered water can be fitted without a separate benchtop drill-out.

At 1160mm long this is a topmount sink only, and the 1135 x 475mm cut-out needs a cabinet wide enough to carry it. Fienza recommends neutral cure silicone with a 24-hour cure before use, and the cutting template should be checked against the actual sink before cutting. Allow at least 6cm between the tap and the closest cut line.

• Sink: Fienza Kuro Granite 32L/22L One & Three Quarter Bowl Kitchen Sink with Drainer (68606, 68606L-1, 68606R-1, 68606L-2 or 68606R-2, Matte Black)
• Basket wastes: PVD matte black basket wastes

• INSTALLATION GUIDE (PDF)
• 68606 SPECIFICATIONS SHEET (PDF)
• 68606L-1 SPECIFICATIONS SHEET (PDF)
• 68606R-1 SPECIFICATIONS SHEET (PDF)
• 68606L-2 SPECIFICATIONS SHEET (PDF)
• 68606R-2 SPECIFICATIONS SHEET (PDF)
• 68606 CUTTING TEMPLATE (PDF)