Artusi CAGH600X 60cm Wide Stainless Steel Gas Cooktop With 4 Burners

Price on Application
SKU: CAGH600X
Brand: Artusi
Barcode: 9347777002228
Why You’ll Love It
  • 3.8kW wok burner: A high-power wok burner on a 60cm cooktop gives fast boiling and stir-frying heat.
  • Four burner sizes, 8.3kW total: One wok, two 1.75kW semi-rapid and a 1.0kW auxiliary burner cover searing through to simmering.
  • Flame failure on all burners: Each burner automatically cuts off the gas if the flame goes out.
  • Plug and lead, 557mm x 477mm cutout: A 10 amp plug and lead and a standard 60cm cutout simplify replacing an older gas hob.
Ideal For
  • Replacing a 60cm gas hob: The 557mm x 477mm cutout suits like-for-like replacement where gas is already connected.
  • Families wanting a budget stainless gas cooktop: Four burners and 8.3kW total in stainless steel cover everyday family cooking.
  • Stir-fry cooks: The 3.8kW wok burner delivers the high heat needed for wok cooking.
  • Rental and investment kitchens: Enamel trivets and a plug-in lead suit an easy-to-maintain upgrade.


Product Overview

The Artusi CAGH600X is a 60cm built-in gas cooktop with a pressed stainless steel surface and four burners: a 3.8kW wok burner, two 1.75kW semi-rapid burners and a 1.0kW auxiliary burner. The total input is 8.3kW (24.9 MJ/h).

Front knob controls have ignition built in for one-handed lighting, and each burner carries a flame failure device that shuts off the gas if the flame is extinguished. It runs on natural gas or LPG with the injectors changed by a licensed gas fitter.

Enamel trivets and burner caps support the cookware, and the 580mm x 500mm top is only 90mm high. The burner set is one wok, two medium and one simmer burner.

It is a top-mounted installation into a 557mm x 477mm cutout with a plug and lead for a 10 amp power point. The installation guide covers gas, ventilation and clearance details for the installer.

Product Details & Specifications

Product Features
  • 3.8kW wok burner: High-power wok burner (13.3 MJ/h) for rapid boiling and stir-frying.
  • Four burner sizes: 1 wok, 2 semi-rapid and 1 auxiliary burner, covering fast boiling to a gentle simmer.
  • 8.3kW total output: Total of 24.9 MJ/h (8.3kW).
  • Flame failure device: On each burner, shutting off the gas if the flame is extinguished.
  • Built-in electronic ignition: Ignition is part of the front knob control for one-handed lighting.
  • Pressed stainless steel hob: Stainless steel surface with a clean, timeless look.
  • Enamel trivets and burner caps: Enamelled pan supports and caps suit everyday cooking, and the pan supports are dishwasher safe.
  • Front knob controls: Easy to reach controls for each burner.
  • Low 90mm height: 580mm W x 500mm D x 90mm H overall.
  • 557mm x 477mm cutout: Top-mounted opening size.
  • Natural gas or LPG: Convertible by injector change.
  • Plug and lead: Supplied for a 10 amp power point.
Programmes / Functions
  • Wok burner: 3.8kW / 13.3 MJ/h; suits pans of 24 to 26cm.
  • Semi-rapid burners (2): 1.75kW each (5.25 MJ/h); pans of 16 to 18cm.
  • Auxiliary burner: 1.0kW (3 MJ/h); pans of 10 to 14cm.
  • Ignition: Push the knob in, turn anticlockwise to the large flame symbol and hold until lit, then adjust the flame.
  • Flame failure: If a flame goes out, turn off and wait at least 1 minute before relighting.
  • Power failure: Light with a match and hold the knob in for 15 seconds.
  • Pan size limit: Do not use a pot with a base over 26cm diameter on the triple flame burner.
Product Specifications
  • Model: CAGH600X
  • Type: Built-in gas cooktop, top mounted
  • Finish: Stainless steel (pressed hob)
  • Burners: 4 (1 wok, 2 semi-rapid, 1 auxiliary)
  • Wok burner: 3.8kW / 13.3 MJ/h
  • Semi-rapid burners: 2 x 1.75kW / 5.25 MJ/h
  • Auxiliary burner: 1.0kW / 3 MJ/h
  • Total gas input: 8.3kW / 24.9 MJ/h
  • Trivets and burner caps: Enamel
  • Controls: Front knobs
  • Ignition: Automatic electronic
  • Safety: Flame failure device on each burner
  • Gas types: Natural gas and LPG
  • Electrical: 10 amp plug and lead (10 amp power point)
  • Overall size: 580mm W x 500mm D x 90mm H
  • Cutout: 557mm W x 477mm D
  • Hood clearance: 650 to 750mm
  • Barcode (EAN): 9347777002228
Product Measurements
  • Width: 580mm
  • Depth: 500mm
  • Height: 90mm
  • Cutout (W x D): 557mm x 477mm
Product Weight
Installation & Requirements
  • Licensed installation: Installation, including the gas and electrical connections, must be carried out by a licensed person only.
  • Cutout: Cut an opening of 557mm wide x 477mm deep.
  • Worktop thickness: Suits a 40mm or 50mm thick worktop; fit the supplied seal under the edge and secure with the fixing brackets.
  • Clearances above: 650 to 750mm clearance to a rangehood or overhead surface. Adjacent upper cabinets may sit lower than this if they are heat and steam resistant.
  • Under-hob space: Leave a removable panel at least 15mm below the hob and keep a rear ventilation slot of at least 30mm.
  • Room ventilation: Rooms of 5 to 10 cubic metres need a 50 cm2 vent and rooms under 5 cubic metres need 100 cm2; do not install in a room with a bath or shower.
  • Gas connection: G 1/2 inch thread, rigid pipe with a gasket between the inlet pipe and elbow. Natural gas uses the supplied regulator (1.0 kPa); ULPG connects via the test point (2.75 kPa). Leak test every joint with soapy water.
  • Gas conversion: Convertible between natural gas and LPG by changing injectors (see the manual injector table); this must be done by a licensed gas fitter.
  • Electrical: A plug and lead are supplied; connect to a 10 amp power point.
Colour/Finishes
  • Stainless Steel
Warranty

Warranty coverage

Artusi appliances are backed by a comprehensive manufacturer's warranty, providing peace of mind and reliable after-sales support across their full range of kitchen and outdoor appliances.

  • Built-in ovens, cooktops, rangehoods, freestanding cookers (900mm) & dishwashers: 2 years — Parts and labour. Extended to 5 years upon product registration.
  • Freestanding cookers (50cm, 54cm & 60cm) & portable appliances: 2 years — Parts and labour
  • Outdoor BBQs, BBQ lids & beverage chillers: 2 years — Parts and labour (extension not applicable)
  • Indoor appliances used in outdoor/alfresco settings: 3 months only

Proof of purchase is required for all warranty claims. Register your product at artusi.com.au to activate the 5-year extended warranty where applicable.

What's covered

  • Manufacturing defects in materials and workmanship
  • Repair or replacement of faulty products
  • Parts and labour within the applicable warranty period

What's not covered

  • Damage during shipping, delivery, or installation
  • Incorrect installation or failure to follow manufacturer guidelines
  • Misuse, abuse, accidental damage, or neglect
  • Normal wear and tear or cosmetic damage
  • Indoor appliances used in outdoor or alfresco settings
  • Repairs or modifications carried out by unauthorised parties
  • Commercial use of domestic appliances

Conditions

  • Cooktops must be installed by a licensed electrician or licensed gas plumber
  • Products must be used and maintained in accordance with manufacturer instructions
  • Register your product at artusi.com.au to activate the 5-year extended warranty
  • Proof of purchase must be provided with all claims
  • Warranty applies to products sold in Australia only

Making a claim

Claims should be directed through the original place of purchase. For after-sales service and warranty support, contact Artusi directly and have your proof of purchase ready when submitting your claim.

Australian Consumer Law

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

Country Of Origin
Extra Information

The CAGH600X is the enamel trivet version of the Artusi 60cm four-burner gas cooktop; the CAGH600CIX has cast iron trivets instead. The enamel finish keeps the cooktop lighter and easy to maintain, and the pressed stainless steel top gives a clean, timeless look in most kitchens.

The 3.8kW wok burner delivers 13.3 MJ/h for stir-fries and large pots up to 26cm, the two semi-rapid burners (5.25 MJ/h each) cover everyday pans, and the 3 MJ/h auxiliary burner is the one for sauces and slow simmering. The pan supports are dishwasher safe, which makes cleaning up after a big cook-up straightforward.

This is a straightforward replacement for an older 60cm gas hob: it is a top-mounted fit into a 557mm x 477mm opening, with the plug and lead supplied for a 10 amp power point. The box includes the cooktop, the natural gas regulator or ULPG test point, a seal, fixing brackets and the user manual and installation guide. Gas and electrical connections must be made by a licensed person.

Backed by the Artusi 2 year warranty, extendable to 5 years when you register your product. Domestic use only; commercial use voids the warranty.

Included Products / Accessories
  • Gas regulator or test point: Natural gas regulator, or test point for ULPG supply.
  • Seal: Sealing strip to fit around the cutout edge.
  • Fixing brackets: Brackets to secure the hob in the worktop.
  • Documentation: User manual and installation guide with warranty card.

Disclaimer

Product images are for illustrative and presentation purposes only. Any accessories, fittings, or additional items shown may not be included with the product unless explicitly stated in the product description. Please refer to the product specifications and inclusions for full details.