Oliveri ST-1551 Santorini Large Bowl Topmount Sink

• Large 39-litre bowl: Provides room for wide plates, platters, trays and family cookware.
• Compact topmount installation: Combines a generous bowl with an integrated tap landing in a 560mm-wide sink.
• Italian moulded granite: Made from 80% granite and quartz particles blended with 20% acrylic for a substantial European finish.
• Heat resistant to 280°C: Designed to withstand thermal shock, with a surface protector recommended beneath hot cookware.
• Antibacterial and food-safe surface: Supports hygienic preparation while helping resist limescale, odours and kitchen pollutants.
• Scratch and impact resistance: Built for everyday kitchen demands, with minor scuffs able to be gently buffed.
• Heat and sound insulation: Helps retain water temperature and soften noise during use.
• Three colour options: Available in Black, Matte Black and White.

• Brand: Oliveri
• Collection: Santorini
• Product type: Large single-bowl topmount sink
• Material: 80% granite and quartz particles with 20% acrylic
• Construction: Moulded granite
• Mounting option: Topmount
• Number of bowls: 1
• Bowl capacity: 39L
• Heat resistance: Up to 280°C
• Overflow: Variant dependent; overflow kit included on overflow models
• Tap holes: One factory tap hole only; must not be modified
• Minimum cabinet width: 600mm
• Waste fittings: One 90mm covered basket waste included
• Country of manufacture: Italy

• Installation method: Designed for topmount installation with the rim supported above the benchtop.
• Verify dimensions: Confirm the delivered sink, cabinet and cut-out dimensions before cutting the benchtop.
• Cabinet support: Provide a level, structurally sound cabinet meeting the stated minimum width and capable of supporting the filled sink.
• Factory tap hole: Use the supplied tap hole only; the moulded granite sink must not be cut, drilled, ground or modified.
• Seal and secure: Apply a continuous suitable seal beneath the rim and secure the sink evenly with the supplied clips.
• Waste and overflow: Install the supplied waste or wastes and overflow kit where applicable, then test all joints.
• Qualified plumbing: Complete water and waste connections in accordance with local requirements and Oliveri’s instructions.
• Commissioning: Remove debris and confirm drainage, accessory fit, overflow operation and the perimeter seal.

Warranty coverage

Oliveri products are backed by a comprehensive manufacturer's warranty, reflecting the enduring quality of their Australian kitchen, bathroom, and laundry products.

Domestic warranty periods apply. Commercial periods differ. Applies to products purchased after 1st March 2022.

Kitchen sinks & laundry tubs

• Stainless steel sinks & tubs: Lifetime — Replacement product, original purchaser only
• Basket waste & accessories: 1 year — Replacement parts

Basins

• Vitreous china basins: 20 years — Replacement parts, 1 year labour
• Stainless steel & Terzofoco basins: Lifetime — Replacement bowl, original purchaser only

Bathroom tapware

• Cartridge & body: 15 years — Replacement parts, 1 year labour
• Chrome finish: 15 years — Replacement parts, 1 year labour
• PVD finish: 10 years — Replacement parts, 1 year labour
• Other finishes & seals: 5 years — Replacement parts, 1 year labour

Kitchen tapware

• Premium ranges (Vilo, Pepe, Essente 316) — cartridge: 15 years — Replacement parts, 1 year labour
• Premium ranges — body & chrome finish: 7 years — Replacement parts and labour
• Standard ranges — cartridge: 10 years — Replacement parts, 1 year labour
• Standard ranges — body & chrome finish: 7 years — Replacement parts and labour

Showers

• Main body: 15 years — Replacement parts, 1 year labour
• Chrome finish: 7 years — Replacement parts, 1 year labour
• Non-chrome/coloured finish & shower head: 5 years — Replacement parts, 1 year labour
• Hoses, seals & O-rings: 2 years — Replacement parts, 1 year labour

Toilets

• Vitreous china cistern & pan: 20 years — Replacement parts, 1 year labour
• Toilet seat: 5 years — Replacement parts, 1 year labour
• Valves & fittings: 2 years — Replacement parts, 1 year labour

Baths

• Island & inset bath shell: 15 years — Replacement parts, 1 year labour
• Freestanding bath shell: 10 years — Replacement parts, 1 year labour

Bathroom accessories

• Parts & chrome finish: 7 years — Replacement parts, 1 year labour
• Non-chrome/coloured finish: 5 years — Replacement parts, 1 year labour

Proof of purchase is required for all claims. The lifetime warranty applies to the original purchaser only and is not transferable.

What's covered

• Manufacturing defects in materials and workmanship
• Repair or replacement of faulty products within the applicable warranty period
• Replacement of defective parts

What's not covered

• Scratching or general surface finish deterioration from normal use
• Incorrect installation or failure to follow manufacturer guidelines
• Misuse, abuse, accidental damage, or neglect
• Use of abrasive, acidic, or harsh chemical cleaning products
• Damage from excess water pressure (over 500kPa) or water temperature
• Normal wear and tear, including seals and O-rings
• Repairs or modifications carried out by unauthorised parties
• Products with visible faults installed without prior reporting

Conditions

• Must be installed by a licensed plumber, tradesperson, or electrician as appropriate
• Must be installed in accordance with Australian Standards and manufacturer instructions
• Water pressure must not exceed 500kPa
• Products must be inspected for damage before installation
• Braided stainless steel flexible hoses must be inspected every 12 months
• Proof of purchase must be provided with all claims
• The warranty applies to the original purchaser only

Making a claim

To make a warranty claim, contact Oliveri directly by phone or email. Please have your proof of purchase, photos of the product and defect, and installer details ready when submitting your claim.

Australian Consumer Law

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

The ST-1551 combines a broad 39-litre bowl with a compact topmount footprint, making it especially useful for washing wide platters, baking trays and larger cookware. Its integrated tap landing keeps the mixer installation contained within the sink body.

Black, Matte Black and White finishes let the bowl either contrast with or blend into the benchtop. Overflow configuration is variant-dependent, so the selected SKU and plumbing requirements should be confirmed before installation.

• Sink: Oliveri ST-1551 Santorini sink in the selected finish
• Waste: One 90mm covered basket waste
• Overflow: Included only with applicable overflow variant
• Fixings: Topmount clips
• Documentation: Manufacturer installation and care information

• ST-BL1551-OF SPECIFICATIONS SHEET (PDF)
• ST-MB1551-OF SPECIFICATIONS SHEET (PDF)
• CUT-OUT TEMPLATE (PDF)
• GRANITE SINK INSTALLATION INSTRUCTIONS (PDF)