Oliveri SC-1980 Sicily Fireclay Farmhouse Countertop or Undermount Sink

• Reversible farmhouse design: Choose a smooth or fluted exposed apron to suit the cabinetry and room character.
• Two installation approaches: Suitable for countertop or undermount integration when supported and installed correctly.
• Italian handcrafted fireclay: Dense ceramic construction gives each sink an individual premium character.
• 68-litre mega bowl: Accommodates large cookware, baking trays and demanding preparation tasks.
• Non-porous glazed surface: Resists stains, does not rust or fade, and is easy to clean.
• White or matte black finish: Two distinct colour directions suit classic, contemporary and statement kitchens.
• Lifetime sink warranty: Backed by Oliveri’s manufacturer coverage for domestic kitchen sinks.

• Brand: Oliveri
• Models: SC-WH1980 gloss white; SC-MB1980 matte black
• Collection: Sicily
• Product type: Single-bowl reversible fireclay farmhouse sink
• Material: Cast fireclay
• Finish: Non-porous ceramic glaze
• Mounting options: Countertop or undermount
• Apron options: Reversible smooth or fluted front
• Number of bowls: 1
• Bowl capacity: 68L
• Tap holes: Not applicable
• Overflow: Not available
• Minimum cabinet width: 900mm
• Waste fitting: Not included; requires one 90mm extended screw-length basket waste
• Dimensional tolerance: Approximately ±2%
• Country of manufacture: Italy

• Installation choice: Can be installed at countertop level or undermounted, with either the smooth or fluted apron presented outward.
• Measure the supplied sink: Fireclay dimensions can vary by approximately ±2%; the actual sink must be measured before benchtop or cabinet fabrication.
• No generic cut-out template: Prepare the opening from measurements taken directly from the sink being installed.
• Structural support: Provide a level 900mm-minimum cabinet and a load-bearing support cradle independent of the benchtop.
• Safe handling: The 34.5kg sink requires a minimum two-person lift and careful protection of the glazed edges.
• Waste requirement: Purchase one compatible 90mm basket waste with extended screw length; no waste is supplied.
• Qualified installation: Use an experienced installer and complete plumbing and sealing in accordance with Oliveri’s instructions and local requirements.

Warranty coverage

Oliveri products are backed by a comprehensive manufacturer's warranty, reflecting the enduring quality of their Australian kitchen, bathroom, and laundry products.

Domestic warranty periods apply. Commercial periods differ. Applies to products purchased after 1st March 2022.

Kitchen sinks & laundry tubs

• Stainless steel sinks & tubs: Lifetime — Replacement product, original purchaser only
• Basket waste & accessories: 1 year — Replacement parts

Basins

• Vitreous china basins: 20 years — Replacement parts, 1 year labour
• Stainless steel & Terzofoco basins: Lifetime — Replacement bowl, original purchaser only

Bathroom tapware

• Cartridge & body: 15 years — Replacement parts, 1 year labour
• Chrome finish: 15 years — Replacement parts, 1 year labour
• PVD finish: 10 years — Replacement parts, 1 year labour
• Other finishes & seals: 5 years — Replacement parts, 1 year labour

Kitchen tapware

• Premium ranges (Vilo, Pepe, Essente 316) — cartridge: 15 years — Replacement parts, 1 year labour
• Premium ranges — body & chrome finish: 7 years — Replacement parts and labour
• Standard ranges — cartridge: 10 years — Replacement parts, 1 year labour
• Standard ranges — body & chrome finish: 7 years — Replacement parts and labour

Showers

• Main body: 15 years — Replacement parts, 1 year labour
• Chrome finish: 7 years — Replacement parts, 1 year labour
• Non-chrome/coloured finish & shower head: 5 years — Replacement parts, 1 year labour
• Hoses, seals & O-rings: 2 years — Replacement parts, 1 year labour

Toilets

• Vitreous china cistern & pan: 20 years — Replacement parts, 1 year labour
• Toilet seat: 5 years — Replacement parts, 1 year labour
• Valves & fittings: 2 years — Replacement parts, 1 year labour

Baths

• Island & inset bath shell: 15 years — Replacement parts, 1 year labour
• Freestanding bath shell: 10 years — Replacement parts, 1 year labour

Bathroom accessories

• Parts & chrome finish: 7 years — Replacement parts, 1 year labour
• Non-chrome/coloured finish: 5 years — Replacement parts, 1 year labour

Proof of purchase is required for all claims. The lifetime warranty applies to the original purchaser only and is not transferable.

What's covered

• Manufacturing defects in materials and workmanship
• Repair or replacement of faulty products within the applicable warranty period
• Replacement of defective parts

What's not covered

• Scratching or general surface finish deterioration from normal use
• Incorrect installation or failure to follow manufacturer guidelines
• Misuse, abuse, accidental damage, or neglect
• Use of abrasive, acidic, or harsh chemical cleaning products
• Damage from excess water pressure (over 500kPa) or water temperature
• Normal wear and tear, including seals and O-rings
• Repairs or modifications carried out by unauthorised parties
• Products with visible faults installed without prior reporting

Conditions

• Must be installed by a licensed plumber, tradesperson, or electrician as appropriate
• Must be installed in accordance with Australian Standards and manufacturer instructions
• Water pressure must not exceed 500kPa
• Products must be inspected for damage before installation
• Braided stainless steel flexible hoses must be inspected every 12 months
• Proof of purchase must be provided with all claims
• The warranty applies to the original purchaser only

Making a claim

To make a warranty claim, contact Oliveri directly by phone or email. Please have your proof of purchase, photos of the product and defect, and installer details ready when submitting your claim.

Australian Consumer Law

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

This Sicily farmhouse sink balances generous 68-litre capacity with a reversible apron, allowing the same sink to present either a calm smooth face or a more traditional fluted detail. Gloss White creates a classic ceramic look, while Matte Black gives the farmhouse silhouette a bolder contemporary presence.

The dense fireclay body is handcrafted in Italy and finished with a non-porous ceramic glaze that resists staining, rust and fading. Its substantial weight and natural dimensional tolerance mean the sink should be onsite before cabinetry and benchtop work is finalised.

• Sink: Oliveri Sicily SC-WH1980 or SC-MB1980 sink in the selected finish
• Apron faces: Integrated reversible smooth and fluted fronts
• Documentation: Manufacturer installation and care information
• Not included: Basket waste, extended waste screw, mixer and support framing are not supplied

• SC-MB1980 SPECIFICATIONS SHEET (PDF)
• SC-WH1980 SPECIFICATIONS SHEET (PDF)
• INSTALLATION GUIDE (PDF)