Product Description

Product Overview:

The Oliveri NA1700BTW-OF Naples 170cm Back-to-Wall Bath combines the sculptural presence of a freestanding bath with a practical flat rear edge designed to sit neatly against the bathroom wall. Its generous 270-litre capacity and elongated oval form create an inviting centrepiece for contemporary bathroom spaces.

Made from premium white Lucite acrylic with a seamless two-piece construction and high-gloss finish, the Naples bath is designed for comfort, durability and straightforward care. Adjustable self-supporting feet, an integrated overflow and a pre-installed chrome pop-up waste support a considered professional installation.

Product Features:

• 1700mm back-to-wall freestanding bath
• Premium sanitary-grade Lucite acrylic construction
• Seamless two-piece design with a high-gloss white finish
• Generous 270-litre capacity
• Integrated overflow and chrome pop-up waste included
• Adjustable self-supporting feet
• Manufactured to Australian Standard AS 1172.5:2019

Colour / Finishes:

• High Gloss White - NA1700BTW-OF

Cleaning & Maintenance:

• Begin filling with cold water so the acrylic can adapt gradually to temperature changes.
• After use, clean with a soft cloth, warm soapy water and a mild liquid detergent, then rinse and dry.
• Do not use powders, pastes, cream cleaners, citrus-based products, harsh chemicals, window sprays or abrasive cleaners.
• Keep naked flames and cigarettes away from the acrylic surface.

Specifications:

• Product Type: Back-to-Wall Freestanding Bath
• Collection: Naples
• Material: Lucite Acrylic
• Construction: Two-Piece with Seamless Finish
• Finish: High Gloss
• Colour: White
• Capacity: 270 L
• Overflow: Included
• Waste Outlet: Chrome Pop-Up Waste Included

Product Measurements:

• Overall Width: 1700 mm
• Overall Depth: 780 mm
• Overall Height: 600 mm

Product Weight:

• Net Product Weight: 42 kg

Installation & Requirements:

• Installation must be completed by a qualified tradesperson in accordance with local regulations.
• Inspect and protect the acrylic surface before and throughout installation.
• Confirm the floor drain is suitably positioned and does not conflict with surrounding fixtures.
• Adjust the self-supporting feet so the bath is level and the shell sits 3–5mm above the finished floor.
• Connect the pre-installed overflow waste outlet to the floor drain; a flexible connector is recommended and is not included.
• Water-test for leaks and drainage before securing the bath.
• Secure and seal the feet, bath base and rear wall edges with neutral-cure silicone, then allow 24 hours before use.

Extra Information:

The back-to-wall form gives the Naples bath a freestanding appearance while allowing the rear edge to be sealed neatly to the wall. This can simplify cleaning around the back of the bath and creates a crisp, integrated look in the finished bathroom.

The bath shell must not rest directly on the floor, as this can place pressure on the acrylic wall. Correct levelling, a 3–5mm clearance beneath the shell and a complete pre-finish water test are important for reliable drainage and long-term performance.

Included Products / Accessories:

• Oliveri Naples 170cm Back-to-Wall Bath
• Integrated Overflow
• Chrome Pop-Up Waste
• Adjustable Self-Supporting Feet

Warranty:

Oliveri products are backed by a comprehensive manufacturer's warranty, including lifetime cover on selected stainless steel kitchen sinks, laundry tubs and basins, 20 years on selected vitreous china basins and toilets, and 15 years on selected bathroom tapware and shower bodies. Warranty periods vary by product category and are in addition to your rights under the Australian Consumer Law. Refer to the Oliveri Warranty page for full terms and conditions.

Downloads / Product Files:

• NA1700BTW-OF SPECIFICATIONS SHEET (PDF)

• NAPLES BACK-TO-WALL BATH INSTALLATION GUIDE (PDF)