Billi 925101L Home BCS with XL Levered Dispenser

Sale price $6,810.51 Regular price $8,012.37
available online$400 cashback on this billi systemfree delivery australia widefree standard installation when purchased in november promotion
Color: Brushed Chrome
SKU: 925101LBR
Brand: Billi
Why You’ll Love It
  • Three waters, one tap: boiling, chilled and sparkling filtered water from a single XL levered dispenser.
  • One compact module: a single under-bench unit of 395 x 355 x 495 mm with vent free installation.
  • Safe lever operation: position-sensitive levers sit away from the outlets, with a childproof safety lock.
  • Energy aware: water cooled technology and time switch and standby modes.
Ideal For
  • Sparkling water lovers: fresh sparkling water on demand without bottles.
  • Busy family kitchens: boiling, chilled and sparkling water ready for the whole household.
  • Homes with children: a childproof safety lock and boiling water timeouts add protection.
  • Compact cupboards: one under-bench module with no joinery ventilation needed.
Lead Time
Order Type: Standard Order
Delivered by: Billi
These are usual lead times and can occasionally change. If this happens, we'll reach out to keep you posted. This doesn't include courier delivery time to your address. Once your order leaves the warehouse, delivery runs on your chosen courier's timeframe.


Product Overview

The Billi 925101L Home BCS with XL Levered Dispenser delivers instant boiling, chilled and sparkling filtered water from a single above-bench tap, using one space-saving under-bench module. It integrates Billi's water-cooling and energy reclaim technologies into a compact unit for the modern home.

The XL levered dispenser is streamlined and elegant, offering boiling and chilled output delivered safely and at your own pace by operating its position-sensitive levers. Use the left lever (red dot) for boiling water, the right lever (blue dot) for chilled water, and both levers together for sparkling water.

The single under-bench module measures 395 mm (W) x 355 mm (H) x 495 mm (D) and is supplied with a 0.2 micron filter (994052) from BWT. The dispenser is available in Chrome, Brushed Chrome, Matte White and Matte Black as standard finishes, and in Urban Brass, Sable Bronze and Gun Metal Grey as special order finishes.

Product Details & Specifications

Product Features
  • Boiling, chilled and sparkling water: three water types from one dispenser and one compact under-bench module.
  • XL levered dispenser: position-sensitive levers sit safely away from the water outlets. The left lever (red dot) delivers boiling water, the right lever (blue dot) delivers chilled water, and both levers together deliver sparkling water.
  • Dispenser temperature range: 6°C to 99°C.
  • Output: boiling water up to 120 cups per hour, and chilled and sparkling water up to 220 cups per hour, suited to households of up to 20 people.
  • Water cooled technology: heat exchange technology reclaims energy, and the Home BCS is energy efficient.
  • Vent free installation: no joinery ventilation or accessories are required for this product.
  • 0.2 micron filtration: a 994052 sub-micron filter from BWT is supplied as standard.
  • Childproof safety lock: protects against accidental dispensing of boiling water, and a maximum boiling water temperature setting can limit boiling water to between 60°C and 75°C.
  • Multifunction touch display: set temperatures, tea and coffee presets, energy saving modes and filter reminders from the under-bench touch display.
  • Energy saving modes: time switch, standby, override off and locked off modes reduce energy use during periods of non-use.
  • Swivel dispenser: the XL dispenser can be swung 45° in either direction when more sink space is needed.
  • Certified and compliant: Lead Free, listed for Section J7.7 (NCC) and WaterMark licensed (WM-021525).
  • Australian designed and made: manufactured under ISO 9001, ISO 14001 and ISO 45001 certified management systems.
Programmes / Functions
  • Boiling, chilled and sparkling dispense: use the left lever for boiling water, the right lever for chilled water, and both levers together for sparkling water. Levers can be lifted or depressed. When lifted, they latch for continuous delivery until released with a light press.
  • Safety timeout: water delivery stops automatically after a set time: 20 seconds for boiling water, 60 seconds for chilled water and 15 seconds for sparkling water. Release and press the lever again to restart.
  • Childproof safety lock: when switched on, momentarily press the lock button, then the boiling lever, to dispense boiling water. The lock reactivates automatically after a period of non-use. A red lock icon shows the lock is on.
  • Default temperatures: boiling water 97°C, and chilled and sparkling water 6°C.
  • Temperature ranges: boiling water 60°C to 98°C, and chilled and sparkling water 4°C to 20°C. For best performance, 6°C is the lowest recommended chilled and sparkling set temperature.
  • Maximum boiling water temperature: when switched on, boiling water is limited to 70°C by default, adjustable from 60°C to 75°C.
  • Tea and coffee setpoints: presets default to 85°C for tea and 92°C for coffee, and can each be adjusted between 70°C and 98°C. A quick boil option momentarily brings water to 100°C.
  • Energy saving modes: time switch mode activates and de-activates at selected times and days, standby mode activates after a period of non-use, override off mode activates for 2 hours, and locked off mode stays active until deselected. Boiling water cannot be dispensed in these modes.
  • Filter reminders and flush: the display shows filter status as OK, due soon, due or overdue. When overdue, water cannot be dispensed until the filter is replaced. An automatic flush runs for 90 seconds after 48 hours of non-use.
  • Dispenser icons: a red dot flashes while heating and stays on when boiling water is ready, a blue dot flashes while chilling and stays on when chilled water is ready, and an orange dot flashes when a filter change is due and stays on when overdue. Red and blue dots flash yellow if the unit goes into fault.
Product Specifications
  • Brand: Billi
  • Model: Billi Home BCS with XL Levered Dispenser
  • Product code: 925101L
  • Water type: Boiling, chilled and sparkling
  • Dispenser: XL Levered Dispenser
  • Under-bench dimensions: 395 mm (W) x 355 mm (H) x 495 mm (D)
  • Boiling water output: Up to 120 cups per hour
  • Chilled and sparkling water output: Up to 220 cups per hour
  • Dispenser temperature: 6°C minimum, 99°C maximum
  • Power plug: 10 amp
  • Power rating: 1500 W, 220-240 V, 50-60 Hz
  • Water pressure: Minimum 250 kPa (dynamic), maximum 1000 kPa
  • Inlet water temperature: 5°C to 30°C
  • Pressure limiting valve: Integrated 500 kPa pressure limiting valve with dual check valve
  • Refrigerant: R290, 0.055 kg
  • Filtration: 994052, 0.2 micron, supplied as standard
  • CO2 cylinder: 1100 g, providing 200 to 350 L of sparkling water depending on unit settings
  • WaterMark licence: WM-021525
  • Lead free: Yes
  • Section J7.7 (NCC): Yes
  • Management systems: ISO 9001 (FS 790754), ISO 14001 (EMS 801468), ISO 45001 (OHS 801469)
  • WELL: Cornerstone membership
  • Warranty: 3 years manufacturer's warranty
  • Country of origin: Australia
  • Finishes: Chrome, Brushed Chrome, Matte White, Matte Black, Urban Brass (special order), Sable Bronze (special order), Gun Metal Grey (special order)
Product Measurements
  • Under-bench module: 395 mm (W) x 355 mm (H) x 495 mm (D)
  • Minimum cupboard depth: 520 mm
  • Clearance above the unit: 150 mm recommended
  • Air gap around each side of the unit: 10 mm recommended
  • Dispenser mounting hole size: 35 mm, for surfaces 1 mm to 48 mm thick
  • Dispenser tube and cable length supplied: 800 mm
  • Stop tap position: within 600 mm of the unit water inlet
  • Power outlet position: no further than 1000 mm from the unit
Product Weight
Installation & Requirements
  • Installer requirement: must be installed by a licensed tradesperson in accordance with AS/NZS 3500.1, AS/NZS 3500.2, the Plumbing Code of Australia and applicable state regulations.
  • Location: for indoor installation only, on a level surface with the display panel facing the front of the cupboard, and not in an area where a water jet could be used. A minimum cupboard depth of 520 mm is required.
  • Water supply: connect to a cold water supply only, through a 1/2" BSP stop tap (not supplied) installed in an easily accessible location within 600 mm of the unit water inlet. The supply must be microbiologically safe to drink, with a dynamic pressure of 250 kPa to 1000 kPa and a water temperature of 5°C to 30°C. A 600 mm flexible braided hose is supplied.
  • Pressure valve: a certified pressure limiting valve with internal dual check valve is built into the appliance. Do not fit an additional pressure limiting valve or dual check valve.
  • Power: a 10 amp single 3 pin power outlet within the cupboard, no further than 1000 mm from the unit, on a dedicated circuit fitted with an earth leakage protection device (RCD). Plug the unit directly into the power point and do not use a power board or double adaptor. A 1 metre flex cord and plug is supplied.
  • Drainage: a drainage point is required, such as a dishwasher nipple on the waste trap, using the supplied drain boot, or directly to the waste trap using the supplied clamp-on drain adaptor, installed above the water seal on the sink side of the trap.
  • Ventilation and clearances: no joinery ventilation is required. A small 10 mm air gap around each side of the unit and 150 mm of clearance above the appliance for accessibility are recommended.
  • Dispenser hole: the XL dispenser needs a 35 mm hole, a minimum flat surface area of 55 mm diameter for the tap base seal, and at least 20 mm of room for the safety lock button at the rear of the dispenser head. For stone benchtops, Billi recommends a certified stone mason pre-drills the hole, and Billi has a no-cut policy for stone benches.
  • CO2: secure the CO2 cylinder vertically in a suitable, well ventilated location. Set the regulator pressure to around 3 bar, between 3 and 4 bar, and never above 4 bar.
  • Commissioning: flush the water supply before connecting and remove the foam packing from under the filter. The unit runs an automatic commissioning sequence including flush and fill cycles and boiling temperature calibration, during which cold water, CO2 gas, steam and small amounts of hot water may be discharged from the dispenser. Set the sparkling flow rate to roughly 2 L/min using the flow rate adjuster on the rear of the unit.
  • Cold locations: if the unit is installed where the air temperature could fall below 4°C, do not turn off power to the appliance. The appliance is designed to operate in an ambient air temperature range of 5°C to 30°C.
Colour/Finishes
  • Chrome
  • Brushed Chrome
  • Matte White
  • Matte Black
  • Urban Brass
  • Sable Bronze
  • Gun Metal Grey
Warranty

Warranty coverage

Billi is an Australian made and owned brand with over 35 years’ experience in instant filtered boiling, chilled, and sparkling water systems. Every Billi water filtration system is backed by a comprehensive 3-year manufacturer’s warranty.

  • All Billi water filtration systems (purchased on or after 1 March 2026): 3 years — Repair or replacement of defective products, from the date of purchase or installation, whichever is later
  • Billi water filtration systems purchased before 1 March 2026: 2 years
  • 5-year extended warranty (optional): 5 years — Available with a paid Billi 5 Year Sparkling Service Plan on new units, redeemed within 90 days of installation
  • Washroom products & bubblers: 12 months

Installation is deemed to have occurred no later than 12 months after the date of purchase. Any product repaired or replaced under warranty is covered for the remainder of the original warranty period or 6 months, whichever is greater. Register your product online and upload your sales receipt to help speed up any future claim.

What’s covered

  • Defects in Billi products purchased from an authorised Billi reseller
  • Free repair by a Billi accredited service provider at your premises within Australia, or replacement of the product at Billi’s option
  • Freight costs where Billi elects to replace the product

What’s not covered

  • Filters, which are not covered by any Billi warranty
  • Incorrect installation or failure to follow the supplied installation instructions
  • Improper use, misuse, neglect, accident, or abuse, or continued use after a defect becomes apparent
  • Contaminants in the water supply
  • Repairs or modifications by anyone other than a Billi authorised repairer
  • Removal or damage to the serial number or rating plate label
  • Insect or vermin infestation
  • Normal wear and tear, fire, vandalism, storm, earthquake, or foreign matter entering the product
  • Use of non-genuine Billi spare parts
  • Additional costs arising from being unable to readily access the product

Conditions

  • Products must be purchased from a Billi authorised reseller
  • Must be installed correctly in accordance with the supplied installation instructions
  • A written claim, with the sales receipt and evidence of installation date, must be received by Billi no later than 1 month after the warranty expires
  • If your premises are more than 25 km from a Billi accredited service provider, you may be liable for additional freight and service costs
  • Where a product is replaced, removal and installation costs are payable by the customer
  • The warranty applies to the original customer only and doesn’t transfer to later owners
  • The 5-year extended warranty requires a Billi technician (or authorised subcontractor) to carry out the servicing, and charges apply

Making a claim

Contact Billi Australia on 1800 812 321 or at service@billi.com.au as soon as you suspect a fault. Please have your proof of purchase, installation date, and product details ready when submitting your claim.

Australian Consumer Law

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

Country Of Origin
  • Australia
Extra Information

The Billi Home BCS with XL Levered Dispenser delivers boiling, chilled and sparkling filtered water from a single dispenser. Chrome, Brushed Chrome, Matte White and Matte Black are standard finishes, and Urban Brass, Sable Bronze and Gun Metal Grey are special order finishes.

Accessories listed for this model are the 990726 Tubing Extension Kit for Sparkling unit (2 metres), the 992800 XI Font incl 70mm Riser, the 992803 XI Font incl 120mm Riser, the 992820 XI Dispenser Riser 70mm and the 992830 XI Dispenser Riser 120mm. Replacement filters are 994052 (0.2 micron, supplied as standard) and 994051 (5.0 micron). Replacement CO2 cylinders are the 996911 single and 996912 double.

This appliance uses 0.055 kg of R290 flammable refrigerant in a sealed system. Dispose of it at a recycling centre and not in landfill.

Included Products / Accessories
  • Under-bench module: Home BCS under-bench unit with the 994052 0.2 micron filter cartridge pre-installed
  • Dispenser: XL levered dispenser kit in your selected finish, with 800 mm tubes and cable
  • CO2: CO2 cylinder and CO2 regulator (AU and NZ only)
  • Installation kit: drain tube assembly, 600 mm flexible braided hose, black 6 mm PE tube, and a drain connection kit with instruction sheet, hex key, drain boot, drain adaptor, drain clamp and 3 spring clamps
  • Power: power cable
  • Documentation: user guide, installation guide, caution label, new purchase information sheet and warranty sheet

Disclaimer

Product images are for illustrative and presentation purposes only. Any accessories, fittings, or additional items shown may not be included with the product unless explicitly stated in the product description. Please refer to the product specifications and inclusions for full details.