Billi 915100G Home B5000 Sparkling with Multifunction Mixer Tap

Sale price $6,715.66 Regular price $7,900.78
available online$350 cashback on this billi systemfree delivery australia widefree standard installation when purchased in november promotion
Color: Brushed Chrome
SKU: 915100GBR
Brand: Billi
Why You’ll Love It
  • Three waters, one tap: boiling, chilled and sparkling filtered water from one touch-control tap.
  • One tap, mains too: a flick mixer adds mains hot and cold water to the same tap.
  • Fresher sparkling taste: adjustable sparkling level and chilled temperature.
  • 5 Star WELS tap: water-efficient at 5.0 litres per minute.
Ideal For
  • Sparkling water lovers: fresh sparkling water on demand without bottles.
  • Kitchens wanting one tap: filtered boiling, chilled and sparkling water plus mains hot and cold from one dispenser.
  • Homes with children: a childproof safety lock and boiling water timeouts add protection.
  • Cupboards with room for two units: a boiling unit of 180 x 340 x 360 mm and a chilled and sparkling unit of 255 x 410 x 420 mm.
Lead Time
Order Type: Standard Order
Delivered by: Billi
These are usual lead times and can occasionally change. If this happens, we'll reach out to keep you posted. This doesn't include courier delivery time to your address. Once your order leaves the warehouse, delivery runs on your chosen courier's timeframe.

Water rating
Water Consumption: 5.0 litres per min
Registration Number: T42988
Licence number: 0257

Product Overview

The Billi Home B5000 Sparkling with Multifunction Mixer Tap (915100G) delivers instant boiling, chilled and sparkling filtered water at your fingertips, alongside mains hot and cold water, through one tap. The B5000 Sparkling integrates Billi's water-cooling and energy reclaim technologies into a space-saving under-bench system for the modern home.

The Good Design Award winning integrated Multifunction Mixer Tap dispenses filtered water through a touch-sensitive interface, and delivers mains hot and cold water by operating a standard flick mixer. Red, blue and white capacitive touch buttons on the tap deliver boiling, chilled and sparkling water, with adjustable chilled temperature and adjustable sparkling level.

The system uses two under-bench units: a boiling unit of 180 mm (W) x 340 mm (H) x 360 mm (D) and a chilled and sparkling unit of 255 mm (W) x 410 mm (H) x 420 mm (D). It is supplied with a 0.2 micron filter (994052). The tap carries a 5 Star WELS rating at 5.0 litres per minute (registration number T42988, licence number 0257). It is available in Chrome, Brushed Chrome, Matte White and Matte Black as standard finishes, and in Urban Brass, Sable Bronze and Gun Metal Grey as special order finishes.

Product Details & Specifications

Product Features
  • Boiling, chilled and sparkling water: three water types from one tap and one under-bench system.
  • Multifunction Mixer Tap: a Good Design Award winning tap with touch-sensitive filtered water buttons and a standard flick mixer for mains hot and cold water.
  • Dispenser temperature range: 6°C to 99°C.
  • Fresher sparkling taste: sparkling water is made on demand, with adjustable sparkling level and adjustable chilled temperature.
  • Ice bank technology: an ice bank chiller module keeps chilled water ready.
  • 0.2 micron filtration: a 994052 sub-micron filter is supplied as standard.
  • Childproof safety lock: protects against accidental dispensing of boiling water, and a boiling water disabled mode can switch boiling water off completely while chilled and sparkling water work as normal.
  • Safety timeout: water flow stops automatically after 10 seconds for boiling water and 1 minute for chilled water.
  • Eco-Intelligence energy modes: a self-learning timer, standby mode and holiday mode help reduce energy use.
  • 5 Star WELS tap: 5.0 litres per minute under WELS registration number T42988, licence number 0257.
  • Certified and compliant: Lead Free, listed for Section J7.7 (NCC) and WaterMark licensed (WM-022690 for the unit and WM-021914 for the tap).
  • Australian designed and made: manufactured under ISO 9001, ISO 14001 and ISO 45001 certified management systems.
Programmes / Functions
  • Boiling, chilled and sparkling dispense: filtered water is dispensed with capacitive touch buttons on the left side of the tap. The red button delivers boiling water, the blue button chilled water and the white button sparkling water. Press and hold for momentary dispensing, or double tap for continuous delivery until stopped by pressing the boiling, chilled or sparkling button.
  • Mains mixer: operate the mixer lever on the right side of the tap to deliver mains hot and cold water.
  • Safety timeout: water flow stops automatically after a set time to prevent an uncontrolled flow: boiling water after 10 seconds and chilled water after 1 minute. Release and press the button again to restart the flow.
  • Childproof safety lock: a red padlock icon shows the childproof safety lock is on. To unlock, press the red lock icon; the lock turns green when unlocked.
  • Boiling water disabled mode: an additional safety isolation setting that disables boiling water completely. Chilled water can still be dispensed normally, and the red icon stays off in this mode.
  • Energy settings: 24-hour continuous mode, Eco-Intelligence mode and holiday mode are selected in the options menu using the tap buttons and the pressure release button on the under-bench unit, as described in the user guide.
  • Eco-Intelligence self-learning timer: learns usage over up to a month. With it enabled, the unit enters standby if no water is expected for 3 hours or more, and shuts down completely if no water is expected for 6 hours or more.
  • Standby mode: after two hours from the last use, the hot water set point is reduced to 72°C. Pressing a button in standby dispenses no water; the indicators flash to show the water is not ready, and the button can be pressed again to dispense.
  • Holiday mode: press the pressure relief button located under the unit cover beside the filter housing to disable the water chiller and heater when the unit will not be used for long periods.
  • Tap icons: the red boiling icon flashes while heating and stays on when boiling water is ready, the blue chilled icon flashes while chilling and stays on when chilled water is ready, and the white sparkling icon stays on when sparkling water is ready. The sparkling icon flashes yellow when a filter change is due and stays on when overdue. The red and blue icons flash yellow if the unit goes into fault.
Product Specifications
  • Brand: Billi
  • Model: Billi Home B5000 Sparkling with Multifunction Mixer Tap
  • Product code: 915100G
  • Water type: Boiling, chilled and sparkling
  • Dispenser: Multifunction Mixer Tap
  • Under-bench dimensions (boiling): 180 mm (W) x 340 mm (H) x 360 mm (D)
  • Under-bench dimensions (chilled and sparkling): 255 mm (W) x 410 mm (H) x 420 mm (D)
  • Dispenser temperature: 6°C minimum, 99°C maximum
  • Power plug: 2 x 10 amp
  • Power rating: 1500 W, 220-240 V, 50-60 Hz
  • Water pressure: Minimum 250 kPa (dynamic), maximum 1000 kPa
  • Inlet water temperature: 5°C to 30°C
  • Pressure limiting valve: Integrated 500 kPa pressure limiting valve with dual check valve
  • Filtration: 994052, 0.2 micron, supplied as standard
  • CO2 cylinder: 1100 g, providing 200 to 350 L of sparkling water depending on unit settings
  • WELS rating: 5 Star (tap), 5.0 litres per minute
  • WELS registration number: T42988
  • WELS licence number: 0257
  • WaterMark licence: WM-022690 (unit), WM-021914 (tap)
  • Lead free: Yes
  • Section J7.7 (NCC): Yes
  • Management systems: ISO 9001 (FS 790754), ISO 14001 (EMS 801468), ISO 45001 (OHS 801469)
  • WELL: Cornerstone membership
  • Warranty: 3 years manufacturer's warranty
  • Country of origin: Australia
  • Finishes: Chrome, Brushed Chrome, Matte White, Matte Black, Urban Brass (special order), Sable Bronze (special order), Gun Metal Grey (special order)
Product Measurements
  • Boiling unit: 180 mm (W) x 340 mm (H) x 360 mm (D)
  • Chilled and sparkling unit: 255 mm (W) x 410 mm (H) x 420 mm (D)
  • Minimum cupboard depth: 520 mm
  • Clearance above the units: 150 mm recommended
  • Side ventilation clearance: minimum 30 mm and 60 mm respectively on each side (left and right) recommended
  • Dispenser mounting hole size: 35 mm, for surfaces 1 mm to 48 mm thick
  • Dispenser tube and signal cable length supplied: 800 mm
  • Stop taps: within 600 mm of the unit water inlet
  • Power outlet position: no further than 1000 mm from the units
Product Weight
Installation & Requirements
  • Installer requirement: must be installed by a licensed tradesperson in accordance with AS/NZS 3500.1, AS/NZS 3500.2, the Plumbing Code of Australia and applicable state regulations.
  • Location: for indoor installation only, on a level surface with the access panel facing the front of the cupboard, and not in an area where a water jet could be used.
  • Water supply: the under-bench units connect to cold water only, through a 1/2" BSP (15 mm) stop tap (not supplied) in an easily accessible position within 600 mm of the unit water inlet. The Multifunction Mixer Tap also needs a 1/2" BSP hot stop tap and a 1/2" BSP cold stop tap with male threads. The supply must be microbiologically safe to drink, with a dynamic pressure of 250 kPa to 1000 kPa and a water temperature of 5°C to 30°C. A 600 mm flexible braided hose is supplied.
  • Pressure valve: a certified pressure limiting valve with internal dual check valve is built into the appliance. Do not fit an additional pressure limiting valve or dual check valve.
  • Power: 2 single or 1 double 10 amp power outlets in an accessible position, located no further than 1000 mm from the under-bench units, on circuits fitted with an earth leakage protection device (RCD). Plug the units directly into the power points and do not use a power board or double adaptor. Each unit is supplied with a 1 metre flex cord and plug.
  • Ventilation and clearances: this is an air cooled product and ventilation is vital under normal operating conditions. A minimum cupboard depth of 520 mm is required, with adequate cross-ventilation on each side and 150 mm of clearance above the appliance for access and to prevent hoses kinking. A ventilation kit with lower cupboard vent grille and 5 mm door spacers is supplied; follow the vent kit installation guide.
  • Tap hole: the tap needs a 35 mm hole in a surface 1 mm to 48 mm thick, with room left for the safety lock button on the rear of the tap head. For stone benchtops, use a certified stone mason to pre-drill the hole, as Billi has a no-cut policy for stone benches.
  • CO2: the CO2 cylinder supplied must be secured in a suitable, well ventilated location. Set the regulator pressure between 3 and 4 bar and never above 5 bar.
  • Commissioning: flush the water supply before connecting and remove the foam packing from under the filter. When the boiling unit is plugged into a Multifunction Mixer Tap, the tap type setting must be changed to AL (four flashes) using the pressure relief switch, and the red boiling and vent tap tubes are temporarily swapped during calibration and swapped back afterwards, as described in the installation guide. The boiling unit calibrates its boiling point on first start, during which steam and small amounts of hot water may be discharged from the tap and vent. The chiller refrigeration system runs continuously for approximately 2 to 3 hours while the ice bank forms; set any chilled water temperature dial no higher than 5.
  • Cold locations: if the unit is installed where the air temperature could fall below 4°C, do not turn off power to the appliance. The appliance is designed to operate in an ambient air temperature range of 5°C to 30°C.
Colour/Finishes
  • Chrome
  • Brushed Chrome
  • Matte White
  • Matte Black
  • Urban Brass
  • Sable Bronze
  • Gun Metal Grey
Warranty

Warranty coverage

Billi is an Australian made and owned brand with over 35 years’ experience in instant filtered boiling, chilled, and sparkling water systems. Every Billi water filtration system is backed by a comprehensive 3-year manufacturer’s warranty.

  • All Billi water filtration systems (purchased on or after 1 March 2026): 3 years — Repair or replacement of defective products, from the date of purchase or installation, whichever is later
  • Billi water filtration systems purchased before 1 March 2026: 2 years
  • 5-year extended warranty (optional): 5 years — Available with a paid Billi 5 Year Sparkling Service Plan on new units, redeemed within 90 days of installation
  • Washroom products & bubblers: 12 months

Installation is deemed to have occurred no later than 12 months after the date of purchase. Any product repaired or replaced under warranty is covered for the remainder of the original warranty period or 6 months, whichever is greater. Register your product online and upload your sales receipt to help speed up any future claim.

What’s covered

  • Defects in Billi products purchased from an authorised Billi reseller
  • Free repair by a Billi accredited service provider at your premises within Australia, or replacement of the product at Billi’s option
  • Freight costs where Billi elects to replace the product

What’s not covered

  • Filters, which are not covered by any Billi warranty
  • Incorrect installation or failure to follow the supplied installation instructions
  • Improper use, misuse, neglect, accident, or abuse, or continued use after a defect becomes apparent
  • Contaminants in the water supply
  • Repairs or modifications by anyone other than a Billi authorised repairer
  • Removal or damage to the serial number or rating plate label
  • Insect or vermin infestation
  • Normal wear and tear, fire, vandalism, storm, earthquake, or foreign matter entering the product
  • Use of non-genuine Billi spare parts
  • Additional costs arising from being unable to readily access the product

Conditions

  • Products must be purchased from a Billi authorised reseller
  • Must be installed correctly in accordance with the supplied installation instructions
  • A written claim, with the sales receipt and evidence of installation date, must be received by Billi no later than 1 month after the warranty expires
  • If your premises are more than 25 km from a Billi accredited service provider, you may be liable for additional freight and service costs
  • Where a product is replaced, removal and installation costs are payable by the customer
  • The warranty applies to the original customer only and doesn’t transfer to later owners
  • The 5-year extended warranty requires a Billi technician (or authorised subcontractor) to carry out the servicing, and charges apply

Making a claim

Contact Billi Australia on 1800 812 321 or at service@billi.com.au as soon as you suspect a fault. Please have your proof of purchase, installation date, and product details ready when submitting your claim.

Australian Consumer Law

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

Country Of Origin
  • Australia
Extra Information

The Billi Home B5000 Sparkling with Multifunction Mixer Tap delivers boiling, chilled and sparkling filtered water alongside mains hot and cold water from a single tap. Chrome, Brushed Chrome, Matte White and Matte Black are standard finishes, and Urban Brass, Sable Bronze and Gun Metal Grey are special order finishes.

The data sheet lists the 990726 Tubing Extension Kit for Sparkling unit (2 metres) as an accessory. Replacement filters are 994052 (0.2 micron, supplied as standard) and 994051 (5.0 micron). Replacement CO2 cylinders are the 996911 single and 996912 double.

Included Products / Accessories
  • Under-bench modules: boiling water module and chilled and sparkling water module, with the 994052 0.2 micron filter installed
  • Dispenser: Multifunction Mixer Tap in your selected finish, with 800 mm tubes and signal cable
  • CO2: CO2 cylinder and CO2 regulator (depending on region)
  • Installation kit: 2 tube spring clamps, 1 clear and 2 black 6 mm PE tubes, 4 x 6 mm stem elbows, flow adjuster, 600 mm flexible braided hose, 6 mm tube cap, 5 mm spacer pads, cupboard base ventilation grille, 4 screws and a 2.5 mm Allen key
  • Power: power cord for the chiller module and a 1 metre flex cord and plug for each module
  • Documentation: user guide, installation guide, vent kit installation guide, sparkling dual tap install instructions, caution label and warranty card

Disclaimer

Product images are for illustrative and presentation purposes only. Any accessories, fittings, or additional items shown may not be included with the product unless explicitly stated in the product description. Please refer to the product specifications and inclusions for full details.