Billi 914000G BA with Multifunction Mixer Tap

Sale price $3,392.97 Regular price $3,991.73
available online$250 cashback on this billi systemfree delivery australia widefree standard installation when purchased in november promotion
Color: Chrome
SKU: 914000GCH
Brand: Billi
Why You’ll Love It
  • Boiling and ambient: up to 90 cups of boiling water an hour, plus filtered ambient water.
  • One tap, mains too: touch buttons for filtered water and a flick mixer for mains hot and cold.
  • 5 Star WELS tap: water-efficient at 5.0 litres per minute.
  • Eco-Intelligence: self-learning energy modes that adapt to your usage.
Ideal For
  • Busy family kitchens: boiling and ambient water on demand for typical family use.
  • Hot drink lovers and cooks: instant boiling water for hot drinks and faster food preparation.
  • Kitchens wanting one tap: filtered boiling and ambient water plus mains hot and cold from one dispenser.
  • Compact cabinets: an under-bench unit of 180 x 340 x 365 mm that needs no ventilation.
Lead Time
Order Type: Standard Order
Delivered by: Billi
These are usual lead times and can occasionally change. If this happens, we'll reach out to keep you posted. This doesn't include courier delivery time to your address. Once your order leaves the warehouse, delivery runs on your chosen courier's timeframe.

Water rating
Water Consumption: 5.0 litres per min
Registration Number: T42988
Licence number: 0257

Product Overview

The Billi Home BA with Multifunction Mixer Tap (914000G) is a boiling and ambient (still) filtered drinking water system for the home. It is a residential-sized system that keeps Billi's core design principles of space saving and vent-free installation, with a compact under-bench unit of 180 mm (W) x 340 mm (H) x 365 mm (D).

The Good Design Award winning integrated Multifunction Mixer Tap dispenses filtered boiling and ambient water through a touch-sensitive interface, and also delivers mains hot and cold water through a standard flick mixer. The system delivers up to 90 cups of boiling water per hour, with a dispenser temperature range from ambient to 99°C.

It is supplied with a 0.2 micron filter (994052), carries a 5 Star WELS rating for the tap at 5.0 litres per minute (registration number T42988, licence number 0257) and is designed and made in Australia. The multifunction mixer tap is available in seven finishes.

Product Details & Specifications

Product Features
  • Boiling and ambient water: instant boiling and filtered ambient (still) drinking water from one under-bench system.
  • Multifunction Mixer Tap: a Good Design Award winning tap with touch-sensitive filtered water buttons and a standard flick mixer for mains water.
  • Up to 90 cups per hour: boiling water output of up to 90 cups per hour, with a dispenser temperature range from ambient to 99°C.
  • 0.2 micron filtration: the 994052 filter is supplied as standard, and a replacement is needed at least every 12 months.
  • Childproof safety lock: the boiling water safety lock helps protect against accidental dispensing, and boiling water stops automatically after a 10 second timeout.
  • Eco-Intelligence energy modes: a self-learning timer, standby mode and holiday mode help reduce energy use.
  • Space saving and vent-free: no joinery ventilation is required, and the under-bench unit measures 180 x 340 x 365 mm.
  • 5 Star WELS tap: 5.0 litres per minute under WELS registration number T42988, licence number 0257.
  • Certified: HACCP certified (licence no. PE-138-BIL-R1-02), Lead Free, listed for Section J7.7 (NCC) and WaterMark licensed (WM-021525 for the unit, WM 021914 for the tap).
  • Australian designed and made: manufactured under ISO 9001, ISO 14001 and ISO 45001 certified management systems.
Programmes / Functions
  • Boiling and ambient dispense: press the red button for boiling water and the blue button for ambient water. Hold for momentary dispensing, or double-tap for continuous delivery until stopped.
  • Mains mixer: operate the lever on the right side of the tap like any single lever tap. Lift to start the flow, swing left for hot and right for cold.
  • Boiling water safety lock: a red padlock icon shows the childproof safety lock is on. Press the red lock icon to unlock, and the lock turns green when unlocked.
  • Boiling water settings: choose hot safety-off (always unlocked), hot safety-on (lock enabled) or disable boiling water completely.
  • Energy settings: choose 24-hour continuous mode, Eco-Intelligence mode or holiday mode.
  • Standby mode: when enabled, the hot water set point drops to 72°C after two hours from the last use.
  • Filter change monitor: the filter icon flashes yellow when a filter change is due and stays on when it is overdue.
Product Specifications
  • Brand: Billi
  • Model: Billi Home BA with Multifunction Mixer Tap
  • Product code: 914000G
  • Water type: Boiling and ambient
  • Dispenser: Multifunction Mixer Tap
  • Under-bench dimensions: 180 mm (W) x 340 mm (H) x 365 mm (D)
  • Boiling output: Up to 90 cups per hour
  • Dispenser temperature: Ambient to 99°C
  • Power plug: 10 amp
  • Power rating: 1600 W, 220-240 V ~ 50-60 Hz
  • Water pressure: Minimum 250 kPa (dynamic), maximum 1000 kPa
  • Minimum water supply: 6 litres per minute at 250 kPa
  • Supply water temperature: Minimum 5°C, maximum 30°C
  • Pressure limiting valve: Integrated 500 kPa pressure limiting valve with dual check valve
  • Filtration: 994052, 0.2 micron, supplied as standard
  • WELS rating: 5 Star (tap), 5.0 litres per minute
  • WELS registration number: T42988
  • WELS licence number: 0257
  • WaterMark licence: WM-021525 (unit), WM 021914 (tap)
  • Lead free: Yes
  • Section J7.7 (NCC): Yes
  • Food handling: HACCP licence no. PE-138-BIL-R1-02
  • Management systems: ISO 9001 (FS 790754), ISO 14001 (EMS 801468), ISO 45001 (OHS 801469)
  • WELL: Cornerstone membership
  • Country of origin: Australia
  • Finishes: Brushed, Chrome, Matte Black, Matte White, Urban Brass, Sable Bronze, Gun Metal Grey
Product Measurements
  • Under-bench unit: 180 mm (W) x 340 mm (H) x 365 mm (D)
  • Benchtop hole size: 35 mm
  • Benchtop or sink thickness for the mixer tap: 1 mm to 45 mm
  • Dispenser tube and signal cable length: 800 mm
  • Supplied flexible braided hose: 600 mm
  • Supplied power cord: 1 metre flex cord and plug
Product Weight
Installation & Requirements
  • Installer requirement: must be installed by a suitably qualified, licensed tradesperson in accordance with AS/NZS 3500.1, AS/NZS 3500.2, the Plumbing Code of Australia and applicable state regulations.
  • Location: for internal installation only, and not in an area where a water jet could be used.
  • Water supply: the under-bench unit connects to cold water only, through a 1/2" BSP cold stop tap (not supplied) in an easily accessible position within 450 mm of the unit's water inlet. The mixer tap also needs a 1/2" BSP hot stop tap and a 1/2" BSP cold stop tap with male threads.
  • Water pressure: dynamic pressure of 250 kPa minimum and 1000 kPa maximum, with a minimum supply of 6 litres per minute. Do not fit an additional pressure limiting valve.
  • Power: a single 10 amp 3 pin power outlet within 1000 mm of the under-bench unit, on a dedicated circuit protected by an RCD. Plug the unit directly into the outlet and do not use a power board or double adaptor.
  • Under-bench clearance: no joinery ventilation is needed, but allow 25 mm of air space around the unit and keep access to the power switch and water supply tap.
  • Benchtop hole: the tap needs a 35 mm hole. For stone benchtops, use a certified stone mason to pre-drill the hole, as Billi has a no-cut policy for stone benches.
  • Commissioning: flush the water supply pipework before connecting, remove the foam packing from under the filter, and set the unit to the multifunction mixer tap (AL) setting during commissioning, as described in the installation guide.
  • Cold locations: if the unit is installed where the air temperature could fall below 4°C, do not turn off power to the appliance.
Colour/Finishes
  • Chrome
  • Brushed Chrome
  • Matte Black
  • Matte White
  • Urban Brass
  • Sable Bronze
  • Gun Metal Grey
Warranty

Warranty coverage

Billi is an Australian made and owned brand with over 35 years’ experience in instant filtered boiling, chilled, and sparkling water systems. Every Billi water filtration system is backed by a comprehensive 3-year manufacturer’s warranty.

  • All Billi water filtration systems (purchased on or after 1 March 2026): 3 years — Repair or replacement of defective products, from the date of purchase or installation, whichever is later
  • Billi water filtration systems purchased before 1 March 2026: 2 years
  • 5-year extended warranty (optional): 5 years — Available with a paid Billi 5 Year Sparkling Service Plan on new units, redeemed within 90 days of installation
  • Washroom products & bubblers: 12 months

Installation is deemed to have occurred no later than 12 months after the date of purchase. Any product repaired or replaced under warranty is covered for the remainder of the original warranty period or 6 months, whichever is greater. Register your product online and upload your sales receipt to help speed up any future claim.

What’s covered

  • Defects in Billi products purchased from an authorised Billi reseller
  • Free repair by a Billi accredited service provider at your premises within Australia, or replacement of the product at Billi’s option
  • Freight costs where Billi elects to replace the product

What’s not covered

  • Filters, which are not covered by any Billi warranty
  • Incorrect installation or failure to follow the supplied installation instructions
  • Improper use, misuse, neglect, accident, or abuse, or continued use after a defect becomes apparent
  • Contaminants in the water supply
  • Repairs or modifications by anyone other than a Billi authorised repairer
  • Removal or damage to the serial number or rating plate label
  • Insect or vermin infestation
  • Normal wear and tear, fire, vandalism, storm, earthquake, or foreign matter entering the product
  • Use of non-genuine Billi spare parts
  • Additional costs arising from being unable to readily access the product

Conditions

  • Products must be purchased from a Billi authorised reseller
  • Must be installed correctly in accordance with the supplied installation instructions
  • A written claim, with the sales receipt and evidence of installation date, must be received by Billi no later than 1 month after the warranty expires
  • If your premises are more than 25 km from a Billi accredited service provider, you may be liable for additional freight and service costs
  • Where a product is replaced, removal and installation costs are payable by the customer
  • The warranty applies to the original customer only and doesn’t transfer to later owners
  • The 5-year extended warranty requires a Billi technician (or authorised subcontractor) to carry out the servicing, and charges apply

Making a claim

Contact Billi Australia on 1800 812 321 or at service@billi.com.au as soon as you suspect a fault. Please have your proof of purchase, installation date, and product details ready when submitting your claim.

Australian Consumer Law

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

Country Of Origin
  • Australia
Extra Information

The Billi Home BA with Multifunction Mixer Tap is designed for typical family use, offering boiling and filtered ambient water instantly alongside mains hot and cold water from a single tap. The Gun Metal Grey, Sable Bronze and Urban Brass finishes are special order finishes, and Chrome, Matte Black, Brushed and Matte White are standard finishes.

The data sheet lists the 990720 Tubing Extension Kit as an accessory. Replacement filters are 994052 (0.2 micron, supplied as standard) and 994051 (5.0 micron).

Included Products / Accessories
  • Under-bench module: with the 994052 0.2 micron filter installed
  • Multifunction Mixer Tap: in your selected finish, with its mounting and connection parts
  • Hoses and tubing: 3 tube spring clamps, a 600 mm flexible braided hose and 800 mm dispenser tubing
  • Power: 1 metre flex cord and plug
  • Documents and tools: user guide, installation guide, electrical connection information, warranty card, caution label and a 2.5 mm Allen key

Disclaimer

Product images are for illustrative and presentation purposes only. Any accessories, fittings, or additional items shown may not be included with the product unless explicitly stated in the product description. Please refer to the product specifications and inclusions for full details.