Product Description

Product Overview:

The Fienza RAK Stella RKS115 is a 755mm-wide single bowl butler sink, formed from fine fire clay ceramic and finished in Alpine Gloss White. Its broad rectangular bowl, exposed flat front and clean-sided profile provide the substantial presence expected of a traditional farmhouse sink, while the restrained detailing allows it to sit comfortably within contemporary, transitional and classic kitchen designs.

The sink is glazed on all sides, creating a consistent finished surface across the bowl, apron and exterior walls. Internally, the bowl measures approximately 695mm wide by 395mm from front to back, with a depth of 225mm. This gives the Stella a generous uninterrupted washing area for large cookware, oven trays, serving pieces and everyday kitchen preparation.

Installation can be configured as either undermount or flushmount. At 46kg, the RKS115 must be carried by permanent support shelving within the cabinetry rather than relying on the benchtop or sealant for structural support. A compatible Fienza A3 waste with an extended fixing bolt and foam seal is required and must be purchased separately.

Product Features:

• Fine fire clay ceramic: robust ceramic construction creates the substantial form, weight and smooth glazed surface associated with a premium butler sink.
• Generous single bowl: the uninterrupted 695 x 395mm internal bowl provides practical space for washing larger pots, oven trays and serving pieces.
• 225mm bowl depth: a deep working area helps contain water and accommodates bulky cookware without dividing the sink into separate compartments.
• Flat apron front: the exposed front surface presents a clean, architectural face within the kitchen cabinetry.
• Glazed on all sides: the ceramic finish extends across the complete exterior, supporting both undermount and flushmount installation configurations.
• Alpine Gloss White finish: a bright, reflective ceramic surface suited to light, neutral and contrasting kitchen palettes.
• Undermount or flushmount installation: offers flexibility in how the sink meets the surrounding benchtop, subject to suitable cabinetry and professional installation.
• Dedicated waste compatibility: designed for Fienza A3 sink wastes equipped with an extended fixing bolt and thick foam seal for secure fitment to the ceramic outlet.
• Permanent cabinet support: the 46kg sink is designed to rest on purpose-built support shelving beneath the benchtop.
• Made in the United Arab Emirates: manufacture is identified on Fienza’s current product specification sheet.

Colour / Finishes:

• Alpine Gloss White - RKS115

Cleaning & Maintenance:

• Routine cleaning: wipe the sink with a clean, soft cloth and mild soapy water or a non-abrasive cleaner.
• Cleaner testing: test any cleaning product on an inconspicuous area before applying it across the complete sink.
• Chemical spills: remove hair dye, aftershave, nail polish, nail polish remover, aerosol spray and other harsh chemicals immediately, then clean the affected area with mild soapy water and a soft cloth.
• Surface protection: avoid placing very hot personal-care appliances or similar heated objects directly onto the glazed surface, as concentrated heat may cause marking or discolouration.
• Abrasive products: do not use abrasive cleaners, scourers or other products that may scratch or dull the glazed finish.

Specifications:

• Product type: medium single bowl butler sink
• Product collection: RAK Stella
• Bowl configuration: single bowl
• Front profile: flat apron front
• Material: fine fire clay ceramic
• Finish: Alpine Gloss White
• Surface treatment: glazed on all sides
• Installation options: undermount or flushmount
• Waste opening diameter: 90mm
• Waste requirement: Fienza A3 waste with extended fixing bolt and foam seal
• Waste inclusion: sold separately
• Cabinet support: permanent support shelving required
• Manufacturing tolerance: allow ±10mm for ceramic manufacturing variance
• Product weight: 46kg
• Country of manufacture: United Arab Emirates

Product Measurements:

• Overall dimensions (W x D x H): 755 x 455 x 255mm
• Nominal published depth: 456mm on the manufacturer product page
• Internal bowl dimensions (W x D): 695 x 395mm
• Internal bowl depth: 225mm
• Waste opening: 90mm diameter

Fienza advises that butler sink measurements are a guide only. Due to the nature of ceramic manufacture, dimensional variation of up to ±10mm may occur. The physical sink must be measured before cabinetry, support framing or benchtop openings are finalised.

Product Weight:

• Product weight: 46kg

Installation & Requirements:

• Installation type: undermount or flushmount
• Structural support: install on permanent, level support shelving within the base cabinetry
• Load consideration: cabinetry must be designed to carry the sink’s 46kg unfilled weight together with the additional load of water and items placed in the bowl
• Final measurements: physically measure the delivered sink before fabricating cabinetry or cutting the benchtop
• Ceramic tolerance: allow for up to ±10mm manufacturing variation in dimensions and form
• Benchtop preparation: determine the final opening and edge treatment from the physical product rather than relying solely on the technical drawing
• Waste fitting: use one compatible Fienza A3 waste fitted with the specified extended bolt and thick foam seal
• Waste outlet: 50mm outlet on the compatible A3 waste assembly
• Waste installation depth: compatible A3 waste assembly is approximately 90mm deep
• Installation trade: installation should be completed by suitably qualified kitchen, benchtop and plumbing trades
• Inspection before installation: inspect the sink for visible faults, finish irregularities or transport damage before it is installed
• Sealing: use sealing and fixing materials appropriate for the ceramic sink, benchtop substrate and selected installation method

The sink must not be suspended solely from the benchtop or adhesive. The permanent support structure should hold the sink securely and evenly without introducing concentrated pressure points into the ceramic body.

Country of Origin:

• Made in the United Arab Emirates

Extra Information:

Fine fire clay ceramic is produced through a high-temperature manufacturing process and may exhibit small dimensional or form variations between individual sinks. These characteristics make physical product verification essential before adjoining cabinetry and benchtops are completed. Fienza specifies a manufacturing tolerance of ±10mm and states that its technical drawing is a guide rather than a substitute for measuring the delivered product.

The RKS115 is supplied without a sink waste. It requires a specialised Fienza A3 waste with an extended fixing bolt and thick foam seal. The seal replaces the standard black rubber seal and is designed to provide secure fitment through the thicker ceramic base of selected RAK butler sinks. Compatible finishes allow the visible waste to be coordinated with surrounding tapware and kitchen hardware.

Fienza identifies its butler sink range as heatproof, food safe, stain resistant, impact resistant and easy to clean. These shared material qualities support use in working kitchen and laundry environments, while the glazed surface helps maintain a hygienic finish through routine cleaning.

Warranty:

Fienza products are backed by an industry-leading manufacturer's warranty, with coverage ranging from lifetime on ceramic disc cartridges and mixer structures through to 25 years on cast stone basins and stainless steel sinks. Warranty periods vary by product category. All warranties are in addition to your rights under the Australian Consumer Law.

Fienza butler sinks are backed by a 5-year manufacturer's warranty against defects in materials and workmanship. All warranties are in addition to your rights under the Australian Consumer Law.

Downloads / Product Files:

• SPECIFICATIONS SHEET (PDF)