Product Description

Product Overview:

The Fienza RAK Jacklyn is an 80cm double bowl butler sink designed for substantial kitchen workspaces requiring the capacity and separation of two full-sized bowls. Its broad rectangular profile, flat apron front and Alpine Gloss White finish give the sink a clean architectural presence while retaining the traditional character of fire clay farmhouse and butler sink design.

Each bowl measures 365mm wide and 450mm from front to back, providing dedicated space for washing, rinsing, food preparation and large cookware. The two bowls are formed within a single fine fire clay ceramic body, glazed on all sides to create a consistent, smooth finish across both visible and concealed surfaces.

The Jacklyn can be installed as either an undermount or flushmount sink. Two configurations are available within the same product family: RKS124 without a tap hole for installations using benchtop-mounted or wall-mounted tapware, and RKS124-1 with a single 35mm tap hole formed in the sink. Both configurations share the same dimensions, material, finish, weight and installation requirements.

Product Features:

• Large double bowl configuration: two full-sized bowls provide separate working areas for washing, rinsing, preparation and draining.
• Fine fire clay ceramic: substantial ceramic construction gives the sink the weight, solidity and traditional material character expected from a premium butler sink.
• Flat apron front: the straight front face creates a clean presentation within exposed-front farmhouse and butler sink cabinetry.
• Glazed on all sides: the ceramic body is fully glazed rather than finished only across the visible faces, providing a consistent Alpine Gloss White surface throughout.
• Two installation options: suitable for undermount or flushmount integration into custom kitchen benchtops and cabinetry.
• Tap hole choice: available without a tap hole or with one factory-formed tap hole, allowing the sink configuration to be matched to the selected tapware installation.
• Dedicated waste compatibility: designed for use with Fienza A3 wastes incorporating the required thick foam seal for selected RAK fire clay sinks.
• Substantial 46kg construction: the weight and material density require permanent structural support beneath the sink rather than relying on the benchtop alone.

Colour / Finishes:

• Alpine Gloss White — No Tap Hole: RKS124
• Alpine Gloss White — 1 Tap Hole: RKS124-1

Cleaning & Maintenance:

• Routine cleaning: wipe the sink with a clean, soft cloth using mild soapy water or a non-abrasive cleaner.
• Cleaner testing: test any cleaning product on an inconspicuous area before applying it across the complete sink surface.
• Chemical spills: remove hair dye, after-shave lotion, nail polish, nail polish remover, aerosol spray and other harsh chemicals immediately to reduce the risk of surface damage or discolouration.
• Spill treatment: clean affected areas immediately with mild soapy water and a clean, soft cloth.
• Hot objects: avoid placing hot objects directly on the glazed ceramic surface, as excessive heat may cause marking or discolouration.
• Abrasive products: avoid abrasive cleaners and cleaning tools that may affect the gloss surface.

Specifications:

• Product type: double bowl butler sink
• Collection: RAK Jacklyn
• Material: fine fire clay ceramic
• Finish: Alpine Gloss White
• Surface profile: flat front
• Surface treatment: glazed on all sides
• Number of bowls: 2
• Tap hole configurations: no tap hole or 1 tap hole
• Tap hole diameter: 35mm on RKS124-1
• Waste opening diameter: 90mm per bowl
• Required waste type: Fienza A3 waste with foam seal
• Waste inclusion: sold separately
• Installation options: undermount or flushmount
• Manufacturing tolerance: ±10mm for ceramic manufacturing variance

Product Measurements:

• Overall dimensions (W x D x H): 800 x 500 x 220mm
• Internal bowl dimensions — each (W x D x H): 365 x 450 x 200mm
• Combined internal bowl width: 785mm
• Waste opening diameter — each bowl: 90mm
• Tap hole diameter — RKS124-1: 35mm

Product Weight:

• Product weight: 46kg

Installation & Requirements:

• Installation type: undermount or flushmount
• Cabinet integration: designed for installation within custom cabinetry and a compatible benchtop opening.
• Structural support: permanent support shelving must be installed beneath the sink to carry its 46kg product weight.
• Benchtop support: the sink must not be supported solely by the benchtop, adhesive or mounting sealant.
• Waste requirement: two compatible Fienza A3 wastes with foam seals are required, with one waste fitted to each bowl.
• Tapware configuration — RKS124: no factory tap hole; suitable for compatible tapware installed through the benchtop or from the wall.
• Tapware configuration — RKS124-1: one factory-formed 35mm tap hole in the sink.
• Physical measurement requirement: measure the actual sink supplied before manufacturing cabinetry or cutting the benchtop.
• Ceramic tolerance: allow for a manufacturing variance of ±10mm rather than relying solely on the nominal technical drawing dimensions.
• Professional installation: installation should be completed by appropriately qualified tradespeople in accordance with the manufacturer’s instructions.
• Pre-installation inspection: inspect the sink for the correct model, configuration and condition before installation, as installation constitutes acceptance of the product under Fienza’s warranty conditions.

Country of Origin:

• Made in United Arab Emirates

Extra Information:

Fire clay ceramic products are manufactured through firing and glazing processes that can produce minor dimensional variation between individual sinks. Fienza specifies a tolerance of ±10mm and requires the physical product to be used for final cabinet, support shelf and benchtop measurements. Templates and published drawings should therefore be treated as planning guides rather than final cutting dimensions.

Both Jacklyn configurations use the same ceramic body and double bowl layout. The selection between RKS124 and RKS124-1 should be made according to the intended tapware position: choose the no-tap-hole model for tapware mounted independently through the benchtop or wall, or the one-tap-hole model where the mixer is to be mounted directly through the sink.

The required A3 waste uses a thick foam seal developed for secure fitment with selected RAK butler sinks. Standard wastes should not be substituted without confirming suitability for the fire clay construction and 90mm waste openings.

Warranty:

Fienza products are backed by an industry-leading manufacturer's warranty, with coverage ranging from lifetime on ceramic disc cartridges and mixer structures through to 25 years on cast stone basins and stainless steel sinks. Warranty periods vary by product category. All warranties are in addition to your rights under the Australian Consumer Law.

Fienza butler sinks are backed by a 5-year manufacturer's warranty against defects in materials and workmanship. All warranties are in addition to your rights under the Australian Consumer Law.

Downloads / Product Files:

• SPECIFICATIONS SHEET (PDF)