• Intelligent Bidet Seat: the Aqua EC113 bidet seat is supplied with the suite, bringing wash, warm air dry, seat warming and a night light to a clean-lined back-to-wall toilet.
• Front and Rear Wash: adjustable front (lady) and rear wash lets each user set the comfort that suits them, with a gentle oscillate and pulsate massage option while washing.
• Adjustable Water Flow and Nozzle Position: three water flow levels and five nozzle positions let the spray be tuned to the individual.
• Warm Water and Heated Seat: water and seat temperatures each have four settings, and an intelligent mode adjusts them as the room temperature changes.
• Warm Air Dry: a warm air dryer with four air temperature settings follows the wash, with deodorising to keep the bathroom fresh.
• Motion Sensor Auto Open and Close Lid: the lid rises as you approach and lowers 10 seconds after you leave, for hands-free convenience.
• Soft Close Seat and Lid: the seat and lid lower gently and quietly.
• UV Sterilised Self-Cleaning Nozzle: the spray nozzle cleans itself before and after each wash and is UV sterilised after use.
• Sensor Night Light: an automatic LED night light glows softly in low light so late-night visits need no bathroom light.
• Smart Power Saving: an optional intelligent power saving mode learns the periods when the seat is used least each day and adjusts seat heating to suit.
• Anti-Scald Protection: the seat temperature automatically drops to 29°C if you remain seated for five minutes.
• Side Buttons and Remote Control: quick-access control buttons on the side of the seat and a remote control panel with a wall mounting bracket are both included.
• Rimless Bowl: the open rim design leaves no hidden under-rim ledge, giving a thorough rinse and easier cleaning.
• Easy Clean Antibacterial Glaze: Parisi's Easy Clean ceramic glaze has antibacterial protection and a smooth, durable gloss white finish.
• Concealed Connection Kit Included: the Bidet Seat Installation Kit (SP.BSIK) is included to assist with bottom inlet concealed water and power connections.
• Universal Trap Connection: connects to either a P-trap or an S-trap, with the PN0030 S-trap connector included for set-outs of 55 to 215mm.
• Integral Backflow Protection: the bidet seat is fitted with an integral high hazard protection device (AVB) that meets the test requirements of AS 2845.1:2022.
• Water-Efficient Dual Flush: a 4 star WELS rating with a 4.6L full flush and 2.8L half flush, averaging 3.2L per flush.
• Manufacturer's Warranty: Parisi covers the ceramic toilet pan and cistern with 10 years' replacement product cover, including one year's labour.

• Rear wash: starts once you are seated and stops automatically after 3 minutes if not stopped by hand.
• Front wash: a front (lady) wash that starts once you are seated and stops automatically after 3 minutes.
• Oscillate and pulsate: while washing, the nozzle can oscillate, and a pulsating spray provides a strong and weak massage action.
• Water flow: three levels are offered, with level 2 as the default when the seat is powered on.
• Nozzle position: five levels move the spray arm forward or backward, with level 5 as the default.
• Water temperature: four levels, from room temperature to 35°C, 37°C and 39°C, or an intelligent mode that holds 35°C to 39°C as the room temperature changes.
• Seat temperature: four levels, from room temperature to 33°C, 35°C and 37°C, or an intelligent mode that holds 32°C to 37°C.
• Warm air dry: starts from the remote control after you are seated and runs for approximately 5 minutes, with four drying air settings of room temperature, 38°C, 42°C and 46°C, or an intelligent mode of 38°C to 46°C.
• Deodoriser: off by default and switched on from the remote control; it runs after the self-clean and after each wash, and stops 10 seconds after you stand.
• Night light: on by default, with a smart light sensor that switches it on and off with the light level in the room, or it can be set from the remote control.
• Auto open and close lid: the lid opens as a person steps close to the front of the pan and closes 10 seconds after they leave; if it is opened and no movement is detected it closes within 2 minutes.
• Hand wave open: with the lid closed, wave a hand within 350mm above the indicator window to open the seat.
• Nozzle self-clean and UV sterilisation: the nozzle cleans itself each time a wash starts and stops, and is UV sterilised after you leave the seat, with automatic sterilisation every 8 hours.
• Nozzle clean function: press the clean button on the side of the seat when you are not seated to extend the nozzle for cleaning; it retracts after 3 minutes or when stop is pressed.
• Intelligent control: active by default, it adjusts water, seat and air temperatures to the ambient temperature.
• Intelligent power saving: off by default and set from the remote control or the eco mode shortcut; seat heating is turned off only during the two longest unused periods of the previous 24 hours.
• Anti-scald function: the seat temperature is automatically reduced to 29°C after 5 minutes of sitting.
• Sleep mode: hold the stop button on the seat for 3 seconds to enter sleep mode, which ends when someone sits on the seat.
• Prompt tones: a short tone acknowledges a valid command and a long tone indicates a minimum or maximum level; tones can be turned off from the remote control.
• Indicator lights: the power, power saving and heater indicators light to show the seat status.
• Remote control: pairs with the seat, operates within 2 metres and is powered by 2 AAA batteries.
• Flush: dual flush with a 4.6L full flush and 2.8L half flush; the bidet seat does not perform the flushing of the pan.

• Product Type: Toilets
• Brand: Parisi
• Collection: Aqua
• Range: Design
• Designer: Parisi Design Team
• Suite Type: Rimless back-to-wall close-coupled toilet suite
• Material: Ceramic / Urea
• Colour / Finish: Gloss White
• Glaze: Parisi Easy Clean ceramic glaze with antibacterial protection
• Rimless: Yes
• Seat: Aqua intelligent bidet seat (EC113)
• Bidet Seat Functions: Motion sensor auto open and close lid, front wash, rear wash, adjustable water temperature, adjustable seat heating temperature, night light, warm air dry with auto deodoriser, soft close seat and lid, side control buttons, remote control
• WELS Rating: 4 Star, 4.6L / 2.8L
• Average Flush: 3.2 Litres
• WELS Registration Number: L08027
• WELS Licence Number: 0022
• Trap Options: Universal trap (P-trap or S-trap)
• P-Trap Set-Out: 185mm height FFL
• S-Trap Set-Out: 55 - 215mm using PN0030 connector (included)
• Inlet Options: Back inlet 765mm height FFL; bottom inlet left and right
• Bidet Seat Water Connection: Bottom inlet, with Bidet Seat Installation Kit SP.BSIK included
• Fixing Type: Floor
• Voltage: 220 - 240V~, 50/60Hz
• Rated Power: 930W
• Maximum Power Consumption: 1550W
• Heating Power: 1500W
• Seat Heating Power: 50W
• Drying Air Power: 300W
• Protection Rating: IPX4
• Electrical Class: Class I appliance, must be connected to a grounding system
• Power Cable Length: Approximately 1.5m
• Water Pressure: Recommended 150 - 500kPa, must not exceed 500kPa
• Water Temperature Range: 4°C - 35°C
• Cleaning Water Volume: 450 - 550mL/min (static pressure 0.2MPa)
• Water Temperature Settings: Intelligent mode (35°C - 39°C) or 4 levels (room temperature, 35°C, 37°C, 39°C)
• Seat Temperature Settings: Intelligent mode (32°C - 37°C) or 4 levels (room temperature, 33°C, 35°C, 37°C)
• Drying Air Settings: Intelligent mode (38°C - 46°C) or 4 levels (room temperature, 38°C, 42°C, 46°C)
• Remote Control: Operates within 2 metres, 2 x AAA batteries
• Backflow Protection: Integral high hazard protection device (AVB) complying with the test requirements of AS 2845.1:2022
• Warranty: Ceramic toilet pan and cistern 10 years' replacement product cover, including one year's labour

• Installation type: floor mounted, rimless back-to-wall suite with a bottom inlet bidet seat.
• Licensed trades: installation must be carried out by a licensed plumber and a licensed electrician.
• Trap connection: universal trap; P-trap set-out is 185mm height FFL, or S-trap set-out is 55 - 215mm using the included PN0030 connector.
• Inlets: back inlet at 765mm height FFL; the bidet seat connects to a bottom inlet.
• Concealed connections: the included Bidet Seat Installation Kit (SP.BSIK) assists bottom inlet concealed installations, with a water shut-off valve placed close to the product and an isolation switch located in the bathroom recommended.
• Water supply: connect only to a domestic potable water supply, with recommended pressure of 150 - 500kPa and never above 500kPa; flush all hoses and lines before final connection and do not reuse an old hose assembly.
• Backflow protection: install with appropriate backflow protection in accordance with the National Construction Code Volume 3, AS/NZS 3500.2 and the Plumbing Code of Australia; local authorities may have varying requirements, so an RPZ valve may be needed in some areas.
• Power supply: 220 - 240V~ 50/60Hz on a circuit protected by a residual current device (RCD) not exceeding 30mA with an effective earth; hardwired through an RCD protected circuit or via the supplied cable and plug.
• Power point position: sockets and plugs must not be placed where they can contact splashing water such as a bath or shower, and a waterproof socket or accessory is advised; wet area zones should be checked with your electrician.
• Room temperature: do not install in a room where the temperature will be below 4°C.
• Commissioning: connect the water supply first and then the power supply, then run the trial operation to check each function and look for leaks.
• Remote control: mount the remote control bracket within reach with the supplied sticker or screws, and keep the remote within 2 metres of the seat.
• Seat fitting: fit the seat to the fixing plate until a click is heard, and never carry the seat by the lid alone.
• Flushing: the bidet seat does not perform the flushing of the pan.

Parisi Warranty

Brand Introduction

Parisi products are backed by a comprehensive manufacturer's warranty against defects in materials and workmanship, reflecting the brand's confidence in the quality and function of every product.

The periods below apply to residential use. Commercial warranty periods differ; contact Parisi for details.

Warranty Coverage

Tapware and Mixers

• Ceramic disc cartridges, taps, outlets and mixers: 15 years' replacement product cover, including five years' labour.
• Chrome and PVD finishes: 15 years, subject to warranty conditions.
• Electroplated matt black finishes: Five years, subject to warranty conditions.
• Sensor tapware: One year for parts and labour.
• Kitchen pull-out sprays and hoses: One year for parts only.

Showers

• Overhead showers, arms, rails and columns: 15 years' replacement product cover, including five years' labour.
• Handshowers, hoses, sliders and diverters: One year replacement product warranty.

Accessories and Heated Rails

• Accessories and heated rails: 15 years' replacement product or parts cover, with five years on electronic components.
• Sensor accessories: One year for parts and labour.

Basins and Toilets

• Ceramic and solid-surface basins and ceramic butler sinks: 10 years' replacement product cover, including one year's labour.
• Ceramic toilet pans, cisterns and bidets: 10 years' replacement product cover, including one year's labour.
• Geberit valves: Three years' replacement product cover, including one year's labour.
• Moda and Pressalit toilet seats: 10 years' replacement product cover, with one year on moveable parts.
• Selected toilet seats: Five years' replacement product cover, with one year on moveable parts.
• Standard toilet seats: One year for parts only.

Concealed Cisterns

• Concealed cistern tanks: 15 years' replacement product cover, including one year's labour.
• Push panels: Two years' replacement product cover, including one year's labour.
• Internal components and sensor flush panels: One year for parts and labour.

Baths

• Stonetec® baths: 25 years' replacement product cover.
• Lucite® acrylic and steel-enamel baths: 15 years' replacement product cover.
• Acrylic inset baths: 10 years' replacement product cover.

Sinks

• Stainless steel sinks: 20 years' replacement product or parts cover.

Bathroom Furniture

• Cabinets and ceramic or quartz-stone tops: 10 years' replacement product cover, including one year's labour.
• Cabinet handles: Five years' replacement product cover.
• Mirrors and mirror cabinets: One year for the replacement product and electrical components.

Doorware

• Handles, knobs, locks and latches: Five years' replacement product cover, including one year's labour.
• PVD finishes: 15 years, subject to warranty conditions.
• Stainless steel and chrome finishes: 10 years, subject to warranty conditions.
• Electroplated matt black finishes: Five years, subject to warranty conditions.

Proof of purchase is required for every warranty claim. The warranty applies only to the original purchaser and is not transferable.

What's Covered

• Manufacturing defects in materials and workmanship.
• Repair, replacement or refund of a defective product at Parisi's discretion.
• Replacement of defective parts within the applicable warranty period.

What's Not Covered

• Incorrect installation or failure to follow the manufacturer's instructions.
• Installation by an unlicensed tradesperson.
• Misuse, abuse, accidental damage or neglect.
• Damage caused by abrasive cleaners, bleach, or acidic or ammonia-based products.
• Damage caused by poor water quality, excessive water pressure or inadequate plumbing preparation.
• Normal wear and tear, including seals and O-rings.
• Water damage to bathroom furniture.
• Repairs or modifications carried out by unauthorised parties.
• Ex-display products.

Conditions

• Tapware, basins, toilets and showers must be installed by a licensed plumber.
• Products must be installed in accordance with the manufacturer's instructions and Australian Standard AS/NZS 3500.
• Water pressure must not exceed 500 kPa. A pressure-limiting valve must be installed where required.
• Products must be inspected for transit damage before installation.
• Products must be maintained and cleaned in accordance with Parisi's care instructions.
• Proof of purchase must be provided with every claim.
• The warranty applies only to the original purchaser.

Making a Claim

Warranty claims should be made through the original place of purchase. Claims may also be lodged through the Parisi warranty claim page. Have your proof of purchase and photographs of the issue available when submitting a claim.

Australian Consumer Law

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

The PN82A is the complete Aqua package: a rimless back-to-wall ceramic suite and the Aqua EC113 intelligent bidet seat supplied together, so there is no separate seat to source. The Aqua family also includes the PN61A wall faced pan and the PN83A ambulant wall faced pan with the same intelligent bidet seat, which makes it easy to match a suite and a pan across more than one bathroom.

Because the seat is powered and plumbed, it is worth planning the bathroom around it early. The seat operates only while you are seated, so the sensor can detect you, and its remote control is best mounted within easy reach and within 2 metres of the seat. The bottom inlet and installation kit keep the water and power connections tucked away under the pan, and the seat releases from its fixing plate for cleaning and servicing, while the safety instructions call for a licensed plumber and electrician, an RCD protected circuit and appropriate backflow protection.

Everyday use is designed to feel simple. Water, seat and air temperatures can be left in intelligent mode or fine-tuned from the remote, the night light and deodoriser can be set to suit the household, and the power saving mode can be enabled to adapt seat heating to your routine. Parisi covers the ceramic toilet pan and cistern with 10 years' replacement product cover, including one year's labour, and any claim is made through the original place of purchase with proof of purchase.

• Bidet seat: Aqua intelligent bidet seat (EC113), with side control buttons.
• Remote control: Remote control with wall mounting bracket and batteries.
• Installation kit: Bidet Seat Installation Kit (SP.BSIK) for bottom inlet concealed water and power connections.
• Connector: PN0030 S trap connector.
• Fitting parts: Installation template and fixing plate for the bidet seat, with power cable and plug.

• PN82A SPECIFICATIONS SHEET (PDF)
• BIDET SEAT INSTALLATION INSTRUCTIONS (PDF)
• BIDET SEAT USER MANUAL (PDF)
• PN82A WELS CERTIFICATION (PDF)
• AQUA INTELLIGENT TOILET BROCHURE (PDF)
• INSTALLATION KIT SPARE PARTS LIST (PDF)